Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

34105

Manufacturer

Helukabel
Manufacturer's Part Number

34105
Description

WIRE AND CABLE; Rated Voltage: 225 V; Shielding: NO; Wire & Cable Name: COMMUNICATION CABLE; IEC Conformity: NO; Diameter: 17.5 mm;
Datasheet

Datasheet

Not In Stock

Popular Products

SMBJ18CA

Good-ark Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;

Details

SMBJ18CA

Semitron

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SN65HVD234DR

Texas Instruments

SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.

Details

2N7002

STMicroelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;

Details

1N4148

Dc Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LL4148

Secos

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148WS

Tak Cheong Electronics Holdings

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Jinan Jingheng Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

Details

IRLML6402TRPBF

Infineon Technologies

IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.

Details

SMBJ18CA

Yageo

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Rfe International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M24308/2-1F

Amphenol

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;

Details

1N4148

Comchip Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

CRCW06031K00FKEAHP

Vishay Intertechnology

Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.

Details

KSZ9031RNXIA

Microchip Technology

KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.

Details

CDSOT23-SM712

Bourns

Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.

Details

2N2222A

Space Power Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SMBJ18CA

Microsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Renesas Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

34105 Technical Details

TYPE	DESCRIPTION
Other Names:	A0915 -CA8889-000-SI -34105-SI -CA8889-000-SI-ND 2266-34105
Wire Gauge (AWG):	19
Construction:	STRANDED
Jacket Material:	POLYETHYLENE
IEC Conformity:	NO
Approvals (V):	CE; DIN; VDE
Shielding:	NO
Rated Voltage:	225 V
Cross Section Area:	.6 mm2
MIL Conformity:	NO
Wire & Cable Name:	COMMUNICATION CABLE
Connector Accessory Type:	WIRE AND CABLE
Insulator Material:	POLYETHYLENE
No. of Conductors:	60
Conductor Material:	BARE COPPER
Maximum Operating Temperature:	70 Cel
Application:	TELEPHONE TRANSMISSION, MEASURING AND SIGNAL PURPOSES
DIN Conformity:	NO
Diameter:	17.5 mm

Category Top Products

44A0111-20-2L

TE Connectivity

TE Connectivity's 44A0111-20-2L wire is a flexible cord with 600V rating, TIN finish, and copper alloy conductor. With -65 to 150 °C operating range, it's ideal for electrical applications requiring durable wires in various environments.

7928A0101000

Belden

Belden 7928A0101000 is a solid construction communication cable with FEP jacket and insulator. It has 8 bare copper conductors, rated for 300V, -70 to 150°C operating temperature range. Approved by CE, CEC, CUL, ISO/IEC, NEC, NEMA. Ideal for electrical wiring applications.

34158

Helukabel

WIRE AND CABLE; Rated Voltage: 225 V; Shielding: YES; Application: AIRPORTS, UNDER GROUND RAILWAY NETWORKS, HOSPITALS; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 70 Cel;

M22759/16-22-5

Defense Logistics Agency

M22759/16-22-5 by Defense Logistics Agency is a MIL-W-22759 approved wire with 600V rating, stranded construction, and tin finish. Featuring extruded ETFE insulation, it operates up to 150°C and has a copper conductor with 22 AWG. Ideal for flexible cord and fixture wire applications due to its 0.326 mm2 cross-section area.

100G0111-1.50-9

TE Connectivity

TE Connectivity's 100G0111-1.50-9 is a stranded electrical wire with TIN finish, rated for 1300V and operating temperatures from -55 to 125°C. With a cross-section area of 1.5mm², it is ideal for flexible cord and fixture wire applications requiring a max wire size of 15 AWG.

2147501042

Molex

CABLE ASSEMBLY;

M22759/11-20-9

Standard Wire & Cable

WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Maximum Operating Temperature: 200 Cel; Resistance: .03 ohm;

2273126-4

TE Connectivity

TE Connectivity 2273126-4 is a 22 AWG communication cable with a rated voltage of 24V and max operating temp of 80°C. Ideal for applications requiring a current rating of up to 4A, this cable has a diameter of 4.7mm and length of 1.5mm, suitable for various electrical wiring needs.

52197

Helukabel

WIRE AND CABLE; Rated Voltage: 300 V; Shielding: YES; Wire Gauge (AWG): 24; Approvals (V): DNV GL; EAC; Insulator Material: CROSS-LINKED POLYOLEFIN-COPOLYMER;

CS-DSPMDB25MF-006

Amphenol

CABLE ASSEMBLY;

55A0111-24-9

TE Connectivity

TE Connectivity's 55A0111-24-9 wire is CSA, CAA, MIL, UL approved with stranded construction and tin finish. Rated for 600V, it operates b/w -65 to 150°C. Ideal for flexible cord and fixture wire applications due to its copper alloy conductor material and 24 AWG size.

151661009

Molex

Molex 151661009 is a UL-approved flat cable with a rated voltage of 60V. It features a tin-finished copper alloy conductor and polyester insulator, suitable for applications requiring a max operating temperature of 105°C and min operating temperature of -40°C. With 31 conductors and a wire gauge of AWG37, it has a cross-sectional area of 0.01 mm2 and resistance of 2.2 ohm, making it ideal for electrical wiring needs.

E90339-000

TE Connectivity

WIRE AND CABLE; Cable Types: 10613; Wire Gauge (AWG): 0; Length: 6.096 mm; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 150 Cel;

1200661038

Molex

Wires and Cables;

152670203

Molex

Molex 152670203 flat cable with UL approval, rated for 60V and 1.25A. Features tin finish copper alloy conductor, polyester insulator, -40 to 105 °C operating temp range. Ideal for electrical wiring applications requiring a flexible flat cable design.

VW3M8201R15

Schneider Electric Sa

CABLE ASSEMBLY;

3051/1OR005

Alpha Wire

Alpha Wire's 3051/1OR005 is a solid construction electrical wire with a rated voltage of 300V. It features a tin conductor finish and polyvinylchloride insulator material, making it suitable for use as flexible cord and fixture wire in various applications.

83264

Helukabel

WIRE AND CABLE; Rated Voltage: 300 V; Shielding: YES; Maximum Operating Temperature: 80 Cel; Jacket Material: POLYVINYL CHLORIDE; Minimum Operating Temperature: -20 Cel;

M16878/4BJE-9

Allied Wire & Cable

WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Minimum Operating Temperature: -60 Cel; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Additional Features: CHEMICAL/FLAME/MOISTURE RESISTANT, STANDARD: MIL-W-16878/4;

55A0111-20-0

TE Connectivity

TE Connectivity 55A0111-20-0 is a CSA, CAA, MIL, UL approved stranded wire with 600V rating. Featuring copper alloy conductor with tin finish and 19X32 stranding, it operates b/w -65 to 150 °C. Ideal for applications requiring flexible cord and fixture wire such as SPEC 55 cables.