Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

M80-5000000M1-02-PM1-00-000

Manufacturer

Harwin PLC
Manufacturer's Part Number

M80-5000000M1-02-PM1-00-000
Description

POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; JESD-609 Code: e4; Termination Contact Finish: Gold (Au);
Datasheet

Datasheet

Not In Stock

Popular Products

E8WSDC12-32.768KTR

Abracon

Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.

Details

1N4148

Texas Instruments

1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.

Details

1N4148

Compensated Devices

RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;

Details

1N4148

Synsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

Rectron

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;

Details

SMBJ18CA

Littelfuse

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

International Components

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;

Details

BAV99

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

261

New England Microwave

Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;

Details

LM358ADR

Texas Instruments

LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.

Details

SMBJ18CA

Sensitron Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

C0603X104K5RACAUTO

KEMET Corporation

C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.

Details

1554216002

Molex

WIRE AND CABLE;

Details

BSS138LT1G

Onsemi

BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.

Details

BAV99-7-F

Diodes Incorporated

Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.

Details

LM317T

Fairchild Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;

Details

MMBT2222ALT1G

Rochester Electronics

NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;

Details

STM32H743XIH6

STMicroelectronics

STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.

Details

2N2222A

Rectron

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;

Details

2N7002

Diotec Semiconductor Ag

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;

Details

M80-5000000M1-02-PM1-00-000 Technical Details

TYPE	DESCRIPTION
Mating Contact Finish:	NOT SPECIFIED
Termination Contact Finish:	Gold (Au)
Connector Type:	POWER CONNECTOR
Contact Material:	NOT SPECIFIED
JESD-609 Code:	e4

Category Top Products

39-01-2086

Molex

The Molex 39-01-2086 is a rectangular power connector with a body length of 0.789 inch, body width of 0.46 inch, and body depth of 0.94 inch. It has an insulation resistance of 1000000000 ohm and a dielectric withstand voltage of 2200VAC. This connector is commonly used in panel mounting applications and has a durability of 30 cycles.

43640-1100

Molex

The Molex 43640-1100 is a rectangular power connector with 11 contacts, rated at 5A signal current. Featuring a mating contact pitch of 0.118", it has an insulation resistance of 1Gohm and operates b/w -40°C to 105°C. Ideal for cable and panel mounting applications, this connector offers durability of up to 30 cycles.

03-06-1032

Molex

Molex 03-06-1032 is a rectangular power connector with 0.145" mating contact pitch, 1500VAC dielectric voltage, and -40 to 105°C operating temperature range. Ideal for commercial applications, it features a polarized housing, crimp termination, and locking mounting option for secure panel installation.

771-9975/116-701

Wago

RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;

MPTC-02-16-02-01-03-L-RA-LC

Samtec

Samtec's MPTC-02-16-02-01-03-L-RA-LC is a rectangular power connector with 20 contacts, liquid crystal polymer insulator, and tin over nickel termination. It is used in commercial applications with a temperature range of -55 to 125°C for board mounting in right angle configuration.

10-08-1051

Molex

Molex 10-08-1051 is a RECTANGULAR POWER CONNECTOR with 5 contacts, POLYAMIDE insulator, and 0.2" contact pitch. It operates b/w -40 to 80°C, has 100u plating thickness, and UL94V-2 flammability rating. Ideal for board mounting applications requiring reliable power connections in commercial settings.

39-30-1122

Molex

The Molex 39-30-1122 is a rectangular power connector with 12 contacts, featuring a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage rating of 1500VAC. It is used in board mounting applications for signal currents up to 6A, with durability rated at 30 cycles.

DF22-4S-7.92C(28)

Hirose Electric

POWER CONNECTOR; Reliability: COMMERCIAL; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4; MIL Conformity: NO; DIN Conformance: NO;

39-01-2140

Molex

Molex 39-01-2140 is a RECTANGULAR POWER CONNECTOR with 14 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It has a temperature range of -40 to 105 °C and is ideal for commercial applications requiring high insulation resistance and crimp termination on cables.

26-01-3115

Molex

Molex 26-01-3115 is a RECTANGULAR POWER CONNECTOR with Matte Tin (Sn) finish. Made of POLYAMIDE66 insulator and BRASS contacts, it has 4 male contacts for board mounting via solder termination. UL94V-2 rated, ideal for power applications requiring reliable connections in electronic devices.

15-06-0246

Molex

Molex 15-06-0246 is a rectangular power connector with 24 contacts, rated at 9A signal current. Featuring a mating contact pitch of 0.165", it has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for commercial applications, this durable connector offers crimp termination and polarization key for secure connections.

1053081208

Molex

Molex 1053081208 is a rectangular power connector with 8 female contacts. It has 0.5" x 0.395" x 0.618" dimensions and uses POLYAMIDE insulator material. Ideal for cable mounting, it operates at -40°C, complies with UL 94V-0 flammability code, and meets CSA and UL standards.

43650-0624

Molex

The Molex 43650-0624 is a rectangular power connector with 6 contacts made of brass. It features TIN over nickel termination finish and glass-filled liquid crystal polymer insulator material. Ideal for board mounting in applications requiring male contact gender and UL 94V-0 flammability rating.

39-29-9062

Molex

Molex 39-29-9062 is a rectangular power connector with 6 contacts, rated at 8A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards meeting CSA and UL requirements.

2-917809-2

TE Connectivity

TE Connectivity's 2-917809-2 is a rectangular power connector with GLASS FILLED POLYESTER insulator, 1.85"x1.051"x1.85" dimensions, and 4 contacts. Operating from -55 to 105°C, it has UL94V-0 flammability rating and crimp termination for commercial applications in cable mounting setups.

43588-0018

Molex

Molex 43588-0018 is a rectangular power connector with 4 contacts, TIN over nickel finish, and 100u plating thickness. It has a dielectric voltage of 2200VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring high insulation resistance and durability.

1954289-2

TE Connectivity

TE Connectivity's 1954289-2 is a RECTANGULAR POWER CONNECTOR with Dielectric Withstanding Voltage of 1500VAC. It has a Rated Current of 6A and operates in temperatures ranging from -40 to 105 °C. Ideal for board mounting applications requiring high voltage and current capabilities.

39-31-0060

Molex

Molex 39-31-0060 is a rectangular power connector with 6 contacts, TIN COPPER finish, and POLYAMIDE66 insulator. It has a dielectric voltage of 2200VAC, operates b/w -40 to 105 °C, and offers high durability with 30 cycles. Ideal for board mounting applications requiring reliable male connectors with natural color insulation.

1321G3

Anderson Power Products

RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: HERMAPHRODITIC; Total No. of Contacts: 1; Contact Material: NOT SPECIFIED; UL Flammability Code: 94V-0;

1053091102

Molex

RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e3; Termination Contact Finish: TIN OVER NICKEL; Contact Material: NOT SPECIFIED;