Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

FT4232HPQ-TRAY

Manufacturer

FTDI
Manufacturer's Part Number

FT4232HPQ-TRAY
Description

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Terminal Form: NO LEAD; No. of Terminals: 68; Package Code: HVQCCN; Package Shape: SQUARE; Maximum Seated Height: .9 mm;
Datasheet

Datasheet

Not In Stock

Popular Products

RC0402JR-070RL

Yageo

Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.

Details

LM358D-T

Philips Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

2N2222A

Aeroflex/metelics

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;

Details

PIC18F4550-I/ML

Microchip Technology

The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.

Details

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

Details

CRG0805F10K

Tyco Electronics Components

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;

Details

2N2222A

Microsemi

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;

Details

1N4148WT

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Terry Semiconductor

RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

SMBJ18CA

Zowie Technology

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

MMBT3906LT1G

Onsemi

MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.

Details

43025-0400

Molex

The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.

Details

SS495ASP

Micro Switch

The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.

Details

1N4148

Shanghai Lunsure Electronic Technology

RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;

Details

LM358N

Taejin Technology

OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

LL4148

Temic Semiconductors

RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM2931Z-5.0RPG

Onsemi

LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.

Details

MMBT3904-7-F

Diodes Incorporated

Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.

Details

ULN2803ADWG4

Texas Instruments

ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.

Details

FT4232HPQ-TRAY Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	1.08 V
Other Names:	768-FT4232HPQ-TRAY
Peripheral IC Type:	BUS CONTROLLER, UNIVERSAL SERIAL BUS
Nominal Supply Voltage:	1.2 V
Maximum Supply Voltage:	1.32 V
Maximum Seated Height:	.9 mm
Surface Mount:	YES
Minimum Operating Temperature:	-40 Cel
No. of Terminals:	68
Package Equivalence Code:	LCC68,.32SQ,16
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
Maximum Data Transfer Rate:	60 MBps
Length:	8 mm
Technology:	CMOS
JESD-30 Code:	S-XQCC-N68
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Maximum Operating Temperature:	85 Cel
Package Code:	HVQCCN
Bus Compatibility:	I2C; UART; USB
Width:	8 mm
Terminal Pitch:	.4 mm
Moisture Sensitivity Level (MSL):	3

Category Top Products

XIO2001IZAJ

Texas Instruments

XIO2001IZAJ by Texas Instruments is a bus controller with 32-bit address and external data bus width. It operates at a max clock frequency of 125 MHz, supporting a data transfer rate of up to 250 MBps. This industrial-grade IC is designed for applications requiring VGA bus compatibility and features a thin profile package style with bottom terminal position.

USBN9604-28MX/NOPB

Texas Instruments

The Texas Instruments USBN9604-28MX/NOPB is a bus controller with 8-bit address and data bus width, operating at up to 24 MHz. It supports USB bus compatibility and has a supply voltage range of 3V to 5.5V, making it ideal for commercial applications requiring universal serial bus peripherals.

FT232BQ

FTDI

FTDI's FT232BQ is a 32-terminal bus controller with a max supply voltage of 5.25V and clock frequency of 6MHz. Ideal for USB peripheral IC applications, it operates b/w 0-70°C with a compact square package style suitable for surface mount technology.

CP2102N-A01-GQFN28

Silicon Labs

Silicon Labs' CP2102N-A01-GQFN28 is a bus controller with UART and VBUS compatibility. It operates b/w -40 to 85°C, supporting data rates up to 1.5 MBps. This CMOS technology chip carrier has 28 terminals in a square package, ideal for industrial applications requiring RS232/RS485 interfaces.

PEX8619-BA50BCG

Plx Technology

BUS CONTROLLER, PCI; Terminal Form: BALL; No. of Terminals: 324; Package Code: BGA; Package Shape: SQUARE; Qualification: Not Qualified;

TUSB3200ACPAHR

Texas Instruments

TUSB3200ACPAHR by Texas Instruments is a 52-terminal BUS CONTROLLER IC with CMOS technology. It operates b/w 0-70°C, supports USB interface, and has a supply voltage range of 3-3.6V. Ideal for applications requiring thin profile components in commercial-grade electronics.

CY7C65215A-32LTXI

Infineon Technologies

CY7C65215A-32LTXI by Infineon is a bus controller with 32 terminals, operating at 1.71-1.89V, supporting I2C, SPI, UART interfaces for data transfer up to 1.5MBps. Ideal for industrial applications requiring RS232/RS422/RS485 drive interface standards in a compact square chip carrier package with very thin profile design.

XIO2001IPNP

Texas Instruments

XIO2001IPNP by Texas Instruments is a bus controller with 32-bit address and external data bus width. It operates at a max clock frequency of 125 MHz, supporting a data transfer rate of 250 MBps. Ideal for industrial applications requiring PCI peripheral ICs with VGA bus compatibility.

PM8533B-F3EI

Microchip Technology

Microchip Technology's PM8533B-F3EI is a bus controller IC with 650 terminals, operating from -40 to 105°C. It supports data transfer rates up to 174 Gbps and interfaces like I2C, PCI, SMBUS, and UART. Ideal for applications requiring high-speed data processing in various electronic systems.

PI7C9X130DNDE

Pericom Semiconductor

BUS CONTROLLER, PCI; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 256; Package Code: BGA; Package Shape: SQUARE;

CY7C68013A-56PVXCT

Cypress Semiconductor

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 56; Package Code: SSOP; Package Shape: RECTANGULAR;

VNC2-48L1C

FTDI

The FTDI VNC2-48L1C is a 48-terminal bus controller with a supply voltage range of 1.62V to 1.98V, suitable for automotive applications. It supports SPI, UART, and USB buses with RS232, RS422, and RS485 drive interfaces. Operating temperature ranges from -40°C to 125°C in a low-profile flatpack package style.

SEC1210-I/PV-UR2

Microchip Technology

SEC1210-I/PV-UR2 by Microchip Technology is a surface mount bus controller with 24 terminals. It operates at a voltage range of 3.6V to 5.5V and has a max clock frequency of 48MHz. This IC is commonly used in industrial applications that require SPI, UART, and USB bus compatibility.

ISP1582BS

NXP Semiconductors

The NXP Semiconductors ISP1582BS is a bus controller with 8-bit address bus width, 16-bit external data bus width, and max clock frequency of 12 MHz. It is used in industrial applications requiring USB peripheral ICs, operating b/w -40 to 85°C with a supply voltage range of 3-3.6V.

ISP1582BS

St-ericsson

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 56; Package Code: HVQCCN; Package Shape: SQUARE;

CY7C68013A-128AXC

Cypress Semiconductor

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 128; Package Code: LFQFP; Package Shape: RECTANGULAR;

ISP1581BD

NXP Semiconductors

NXP Semiconductors' ISP1581BD is a BUS CONTROLLER IC with 8-bit Address Bus Width, supporting 12.5 MBps Data Transfer Rate at 12 MHz Clock Frequency. Ideal for ATA/ATAPI bus compatibility, it operates in industrial temperature range (-40 to 85 °C) with a supply voltage of 3-3.6 V.

NET2272REV1A-LF

Broadcom

NET2272REV1A-LF by Broadcom is a bus controller with 16-bit external data bus width, operating at max 30 MHz clock frequency. It supports USB peripheral IC type and has a terminal pitch of 0.5 mm. Ideal for applications requiring high-speed data transfer over Universal Serial Bus interface.

USBN9604-28MX

Texas Instruments

The Texas Instruments USBN9604-28MX is a bus controller with 3.3/5V power supplies, 28 terminals, and operates b/w 0 to 70°C. It features a small outline package style suitable for surface mount applications. With Gull Wing terminal form and tin lead finish, it's ideal for commercial temperature grade environments requiring up to 40mA supply current.

PI7C9X130DNDE

Diodes Incorporated

PI7C9X130DNDE by Diodes Inc. is a PCI bus controller with 64-bit address and data bus width, operating at up to 133 MHz clock frequency. It features a package style of grid array and supports supply voltages of 1.8V and 3.3V, making it ideal for industrial applications requiring high-speed data processing on the PCI bus.