Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

FC-13532.7680KA-A5

Manufacturer

Epson Toyocom
Manufacturer's Part Number

FC-13532.7680KA-A5
Description

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/FIRST YEAR; Additional Features: TAPE AND REEL; Frequency Stability: 144 %;
Datasheet

Datasheet

Not In Stock

Popular Products

LM317BD2TG

Onsemi

LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.

Details

ULN-2803A

Vishay Sprague

Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.

Details

PIC18F4550-I/ML

Microchip Technology

The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.

Details

SN65HVD230DR

Texas Instruments

SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.

Details

EU2B-YS3303C

Idec

ROTARY SWITCH;

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

1N4148

Itt Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

87832-1420

Molex

87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.

Details

SMBJ18CA

Continental Device India

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Vishay Intertechnology

Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.

Details

0462-201-16141

TE Connectivity

TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.

Details

BAV99

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM107H

General Electric Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;

Details

1N4148

Synsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

Toshiba

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58360

Souriau-sunbank Connection Technologies

Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.

Details

USB2514BI-AEZG

Microchip Technology

USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.

Details

STM32F401CDY6TR

STMicroelectronics

STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.

Details

LM555CN

Harris Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

2N2222A

Microsemi

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;

Details

FC-13532.7680KA-A5 Technical Details

TYPE	DESCRIPTION
Load Capacitance:	12.5 pF
Frequency Tolerance:	20 ppm
Frequency Stability:	144 %
Series Resistance:	70000 ohm
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Drive Level:	.5 uW
Nominal Operating Frequency:	.032768 MHz
Aging:	3 PPM/FIRST YEAR
Physical Dimension:	L3.2XB1.5XH0.8 (mm)/L0.126XB0.059XH0.031 (inch)
Crystal or Resonator Type:	PARALLEL - FUNDAMENTAL
Additional Features:	TAPE AND REEL
Maximum Operating Temperature:	85 Cel

Category Top Products

AB26TRB-32.768KHZ--T

Abracon

AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.

ABS05-32.768KHZ-9-T

Abracon

Abracon's ABS05-32.768KHZ-9-T crystal oscillator offers 20 ppm frequency tolerance, 72% stability, and 90000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz, such as IoT devices, wearables, and consumer electronics.

ABM8G-28.63636MHZ-18-D-2-Y-T

Abracon

ABM8G-28.63636MHZ-18-D-2-Y-T by Abracon is a 28.63636 MHz crystal oscillator with 20 ppm frequency tolerance, 30% stability, and 50 ohm series resistance. Ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range and GOLD OVER NICKEL finish.

9HT11-32.768KDZC-T

Txc

9HT11-32.768KDZC-T by Txc is a crystal oscillator with 20 ppm frequency tolerance, 108% stability, and 90000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices or communication systems. Operating temperature ranges from -40 to 85 °C with compact dimensions of 2mm x 1.2mm x 0.6mm.

ABS25-32.768KHZ-6-T

Abracon

Abracon's ABS25-32.768KHZ-6-T crystal oscillator offers 20 ppm frequency tolerance, 50000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing at 32.768 MHz frequency, such as IoT devices and wearables.

TSX-322525.0000MF18X-W3

Seiko Epson

TSX-322525.0000MF18X-W3 by Seiko Epson is a 25 MHz crystal oscillator with 10 ppm frequency tolerance and 18% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems. Operating temperature range from -40 to 85 °C ensures reliable performance in various environments.

A-1.8432-18-3RD

Raltron Electronics

A-1.8432-18-3RD crystal oscillator by Raltron Electronics operates at 1.8432 MHz with a frequency tolerance of ±30 ppm and stability of ±50%. Ideal for applications requiring precise timing, it features a series resistance of 700 ohm and aging rate of 5 PPM/yr.

ECS-120-18-9X

Ecs International

PARALLEL - FUNDAMENTAL; Mounting Feature: THROUGH HOLE MOUNT; Frequency Tolerance: 50 ppm; Aging: 5 PPM/FIRST YEAR; Minimum Operating Temperature: -10 Cel; Drive Level: 50 uW;

ABM3B-48.000MHZ-B-2-T

Abracon

PARALLEL - 3RD OVERTONE; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/FIRST YEAR; Nominal Operating Frequency: 48 MHz; Load Capacitance: 18 pF;

FC-135R32.7680KA-AC3

Seiko Epson

Seiko Epson's FC-135R32.7680KA-AC3 crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as precision timekeeping in temperature-sensitive environments.

MC-40532.7680K-A0

Seiko Epson

MC-40532.7680K-A0 by Seiko Epson is a crystal oscillator with 100 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as in telecommunications and consumer electronics due to its compact size (9.6mm X 4.06mm X 3.6mm) and surface mount feature.

ABM7-12.000MHZ-D-2-Y-T

Abracon

ABM7-12.000MHZ-D-2-Y-T by Abracon is a 12 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C and features a parallel-fundamental crystal type.

CM200C32768DZFT

Citizen Electronics

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Maximum Operating Temperature: 85 Cel; Manufacturer Series: CM200C;

ABM3B-18.432MHZ-B-2-T

Abracon

ABM3B-18.432MHZ-B-2-T by Abracon is a 18.432 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability, suitable for parallel - 3rd overtone applications. It operates b/w -20 to 70 °C, has a series resistance of 50 ohm, and features nickel/gold terminal finish.

ABM7-20.000MHZ-D-2-Y-T

Abracon

ABM7-20.000MHZ-D-2-Y-T by Abracon is a 20 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems.

MCSJK-7E-27.12-8-30-60-B-30

Multicomp Pro

MCSJK-7E-27.12-8-30-60-B-30 by Multicomp Pro is a crystal oscillator with 30 ppm frequency tolerance, 8 pF load capacitance, and 60 ohm series resistance. Ideal for applications requiring precise timing at 27.12 MHz, such as telecommunications equipment or industrial automation systems. Operating temperature range from -20°C to 70°C ensures reliable performance in various environments.

ABS06-32.768KHZ-T

Abracon

Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.

FC-135R32.7680KF-A3

Seiko Epson

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Drive Level: .5 uW; Frequency Stability: 144 %; Minimum Operating Temperature: -40 Cel;

ABLS-12.000MHZ-B-4-Y-T

Abracon

ABLS-12.000MHZ-B-4-Y-T by Abracon is a 12 MHz Crystal Oscillator with 30 ppm Frequency Tolerance and 30% Stability. Ideal for applications requiring precise timing, it operates b/w -20°C to 70°C, featuring a compact size of 11.4mm x 4.7mm x 4.2mm for surface mount installation in various electronic devices.

ABM3-16.000MHZ-D2Y-T

Abracon

ABM3-16.000MHZ-D2Y-T by Abracon is a 16 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C, featuring nickel gold finish and parallel-fundamental type.