Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

746-012-520-606

Manufacturer

Edac
Manufacturer's Part Number

746-012-520-606
Description

CARD EDGE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE; Contact Style: BELLOWED TYPE;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

STMicroelectronics

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);

Details

2N2222A

Allegro MicroSystems

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LL4148

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

Bkc Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRG0805F10K

Tyco Electronics Components

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;

Details

NDT2955

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;

Details

C1210C104K5RACTU

KEMET Corporation

KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.

Details

1N4148

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

M39029/56-351

Itt Cannon

CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;

Details

SMBJ18CA

Hy Electronic

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

STMicroelectronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Onsemi

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;

Details

0460-202-16141

TE Connectivity

TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.

Details

KSZ9031RNXIA

Microchip Technology

KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.

Details

2N7002

Sipex

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;

Details

ECA2DHG4R7

Panasonic

ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.

Details

1N4148WSF-7

Diodes Incorporated

1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.

Details

LM317T

Integrated Power Semiconductors

Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;

Details

LM317T

Comset Semiconductors

Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;

Details

NE555D

Fairchild Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

746-012-520-606 Technical Details

TYPE	DESCRIPTION
PCB Contact Pattern:	RECTANGULAR
No. of Rows Loaded:	2
Termination Type:	SOLDER
Maximum Operating Temperature (Cel):	105
PCB Contact Row Spacing (mm):	6.35
Body Length:	1.035 inch
Contact Gender:	FEMALE
Connector Type:	CARD EDGE CONNECTOR
Contact Resistance:	10 mohm
Mounting Option-2:	LOCKING
Insulation Resistance:	5000000000 ohm
UL Flammability Code:	94V-0
Mounting Style:	STRAIGHT
Other Names:	151-746-012-520-606
Mixed Contacts:	NO
Plating Thickness (inch):	30u
Contact Style:	BELLOWED TYPE
Filter Feature:	NO
No. of PCB Rows:	2
Mounting Type:	BOARD
Body Depth:	.645 inch
Minimum Operating Temperature:	-40 Cel
Total No. of Contacts:	12
Minimum Withdrawal Force (N):	0.28
Maximum Insertion Force (N):	4.45
Body Width:	.39 inch
Dielectric Withstanding Voltage (V):	1500VAC
Terminal Pitch (mm):	3.175
Terminal Length:	.19 inch
Rated Current - Signal:	3 A
No. of Connectors:	ONE
Insulator Material:	POLYETHYLENE/POLYESTER
Insulator Color:	BLACK
Reference Standard:	UL
Option:	GENERAL PURPOSE
Contact Pattern:	RECTANGULAR
Mating Contact Pitch (inch):	0.125

Category Top Products

5055960401

Molex

BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;

S2B-PH-K-S(LF)(SN)

J S T Mfg

S2B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" mating contact pitch, 800VAC dielectric voltage, and 2A signal current rating. Ideal for applications requiring a male connector with press fit termination, right angle mounting style, and natural insulator color.

2-640456-2

Tyco Electronics Amp

BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: COPPER ALLOY; IEC Conformity: NO; Mixed Contacts: NO;

B6B-XH-A(LF)(SN)

J S T Mfg

B6B-XH-A(LF)(SN) by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.098" pitch, 1000000000 ohm insulation resistance, and 3A signal current rating. It features POLYAMIDE66 insulator material, TIN OVER COPPER mating contact finish, and operates b/w -25 to 85 °C. Ideal for board-to-board connections in electronics applications.

M20-9990345

Harwin Plc

The Harwin PLC M20-9990345 is a board connector with 3A signal current rating, gold-plated contacts, and 0.1" pitch. Ideal for commercial applications, it offers high durability with 300 cycles and operates b/w -40°C to 105°C temperature range.

66506-320LF

Amphenol Communications Solutions

Amphenol Communications Solutions' 66506-320LF is a 2-row loaded board connector with 16 contacts. It has a terminal pitch of 2.54mm and is UL Flammability Code 94V-0 rated. This male connector is used for straight mounting on boards, making it suitable for various applications in the electronics industry.

FTSH-105-01-F-DV-K-A-P

Samtec

Samtec's FTSH-105-01-F-DV-K-A-P is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features phosphor bronze contacts with gold flash finish and operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable, male straight pin-skt connector for surface mount termination on PCBs.

TFSD-20-28C-H-34.00-S

Samtec

Samtec's TFSD-20-28C-H-34.00-S is a 2-row, 40-contact board connector with female contacts for cable mounting. It features crimp termination and socket body style, ideal for high-density applications in electronics and telecommunications industries.

801-43-030-30-001000

Mill-max Mfg

BOARD CONNECTOR; Termination Contact Finish: TIN; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;

1410186-1

TE Connectivity

TE Connectivity 1410186-1 is a BOARD CONNECTOR with 72 contacts, 9 rows, and 0.071" contact pitch. It has LIQUID CRYSTAL POLYMER insulator for -55 to 105 °C operation. Ideal for applications requiring FEMALE connectors with SOLDER termination in a STRAIGHT mounting style.

693071010811

Wuerth Elektronik & Kg

PCB CONNECTOR; Termination Contact Finish: GOLD; JESD-609 Code: e4; Mating Contact Finish: GOLD; Contact Material: COPPER ALLOY;

B5B-XH-AM(LF)(SN)

J S T Mfg

B5B-XH-AM(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 5 contacts, BRASS material, and TIN finish. It has a terminal pitch of 2.5mm and is ideal for board mounting applications requiring male connectors with solder termination.

2-640456-6

TE Connectivity

TE Connectivity 2-640456-6 is a board connector with 26 contacts, 0.1" pitch, and TIN finish. It has a temperature range of -55 to 105°C and UL94V-0 flammability rating. Ideal for commercial applications requiring a reliable male plug with solder termination on a straight mounting style board connector.

746-066-520-601

Edac

Edac 746-066-520-601 is a 2-row card edge connector with 66 contacts. It features a mating contact pitch of 0.125", insulation resistance of 5Gohm, and dielectric voltage of 1500VAC. Ideal for PCB applications requiring high current signal transmission in temperatures ranging from -40 to 105°C.

2-640456-3

TE Connectivity

TE Connectivity 2-640456-3 is a 23-contact board connector with 0.1" pitch, suitable for commercial applications. Featuring tin finish, it operates b/w -55 to 105°C and has UL94V-0 flammability rating. Ideal for PCBs, this male plug connector has a rectangular contact pattern and solder termination.

S4B-XH-A(LF)(SN)

J S T Mfg

S4B-XH-A(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.098" mating contact pitch, suitable for applications requiring a max operating temperature of 85°C and min of -25°C. It features brass contacts with tin finish, UL94V-0 flammability rating, and insulation resistance of 1Gohm. Ideal for right-angle mounting on boards in various electronic devices.

DF40C-100DS-0.4V(58)

Hirose Electric

DF40C-100DS-0.4V(58) by Hirose Electric is a 2-row, 100-contact board stacking connector with gold termination finish. Featuring liquid crystal polymer insulator, it offers 50000000 ohm insulation resistance and 100VAC dielectric voltage. Ideal for commercial applications requiring signal current of 0.3A, operating b/w -35 to 85°C temperature range.

22-01-3057

Molex

Molex 22-01-3057 is a board connector with 0.1" pitch, suitable for commercial applications. Features include 5 contacts, 4A signal current rating, and -40 to 105°C operating temperature range. Ideal for cable mounting with crimp termination, this female connector offers high durability and polarization key for secure connections.

FTS-105-01-L-DV-P-TR

Samtec

Samtec FTS-105-01-L-DV-P-TR is a 10-contact board connector with 0.05" mating pitch, suitable for commercial applications. It features gold over nickel finish, liquid crystal polymer insulator, and matte tin termination. Ideal for PCBs with 1.27mm terminal pitch and operating temperatures from -55 to 125°C.

02T-JWPF-VSLE-S

J S T Mfg

BOARD CONNECTOR; DIN Conformance: NO; Contact Material: NOT SPECIFIED; MIL Conformity: NO; IEC Conformity: NO; Mating Contact Finish: NOT SPECIFIED;