Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

ECS.327-12.5-34R-C-TR

Manufacturer

Ecs International
Manufacturer's Part Number

ECS.327-12.5-34R-C-TR
Description

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 10 ppm; Aging: 3 PPM/FIRST YEAR; Series Resistance: 50000 ohm; Physical Dimension: 3.2mm x 1.5mm x 0.9mm;
Datasheet

Datasheet

Not In Stock

Popular Products

LM358DT

ROHM

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;

Details

LM358M

Texas Instruments

LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.

Details

2N7002

Central Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;

Details

SMBJ18CA

Vishay Semiconductors

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMMBT2222ALT1G

Onsemi

SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.

Details

STM32F407VGT6

STMicroelectronics

STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).

Details

LM107H

Rochester Electronics

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;

Details

STM32H753BIT6

STMicroelectronics

STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.

Details

BAV99LT1G

Onsemi

BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.

Details

06035C103KAT2A

KYOCERA AVX

06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.

Details

1N4148WT

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Philips Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

BSS84PH6327XTSA2

Infineon Technologies

BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.

Details

BAV99

National Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM2931Z-5.0G

Onsemi

LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.

Details

LM107H

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;

Details

1N4148

Taitron Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Onsemi

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;

Details

ECS.327-12.5-34R-C-TR Technical Details

TYPE	DESCRIPTION
Load Capacitance:	12.5 pF
Frequency Tolerance:	10 ppm
Frequency Stability:	144 %
Series Resistance:	50000 ohm
Terminal Finish:	Gold (Au) - with Nickel (Ni) barrier
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Drive Level:	.5 uW
Nominal Operating Frequency:	.032768 MHz
Aging:	3 PPM/FIRST YEAR
Physical Dimension:	3.2mm x 1.5mm x 0.9mm
Crystal or Resonator Type:	PARALLEL - FUNDAMENTAL
Maximum Operating Temperature:	85 Cel

Category Top Products

ABS07W-32.768KHZ-K-1-T

Abracon

Abracon's ABS07W-32.768KHZ-K-1-T crystal oscillator offers 10 ppm frequency tolerance, 400% stability, and 60000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz in a compact L3.2XB1.5XH0.9 mm surface mount package with -40 to 125 °C operating range.

NX2016SA-25.000M-STD-CZS-1

Nihon Dempa Kogyo

Quartz Crystals;

FSRLF327

Fox Electronics

FSRLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as telecommunications equipment, industrial controls, and consumer electronics. Operating temperature range from -40 to 85 °C with surface mounting feature.

NX3225GA-20.000M-STD-CRG-2

Nihon Dempa Kogyo

NX3225GA-20.000M-STD-CRG-2 by Nihon Dempa Kogyo is a 20 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in a temperature range of -40 to 85°C, it features surface mounting and low drive level of 10 uW.

9HT11-32.768KDZF-T

Txc

9HT11-32.768KDZF-T by Txc is a crystal oscillator with 20 ppm frequency tolerance, 108% stability, and 90000 ohm series resistance. It operates at 0.032768 MHz and is ideal for applications requiring precise timing in temperature-sensitive environments. With a compact size of L2.0XB1.2XH0.6 (mm), it's suitable for surface mount installations in various electronic devices.

ABLS-18.432MHZ-16-A-2-H-T

Abracon

ABLS-18.432MHZ-16-A-2-H-T by Abracon is a 18.432 MHz crystal oscillator with 20 ppm frequency tolerance and 35% stability. Ideal for applications requiring precise timing, it operates b/w -10°C to 60°C with a load capacitance of 16 pF in a compact surface mount package.

ABS07-120-32.768KHZ-T

Abracon

Abracon's ABS07-120-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 162% stability, and 55000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz in a compact surface-mount package.

9HT7-32.768KBZF-T

Txc

9HT7-32.768KBZF-T by Txc is a crystal oscillator with 50 ppm frequency tolerance, 144% stability, and 65000 ohm series resistance. Ideal for applications requiring precise timing at frequencies around 0.032768 MHz in a compact surface mount package.

X1E000021011912

Seiko Epson

X1E000021011912 by Seiko Epson is a crystal oscillator with 10 ppm frequency tolerance, 20% stability, and 60 ohm series resistance. Ideal for applications requiring precise timing such as telecommunications equipment, industrial automation systems, and consumer electronics. Operating temperature ranges from -40 to 85 °C with a compact size of 3.2mm x 2.5mm x 0.6mm.

LFXTAL002997BULK

Iqd Frequency Products

LFXTAL002997BULK by IQD Frequency Products is a crystal oscillator with 20 ppm frequency tolerance, 43% stability, and 50000 ohm series resistance. It operates at 0.032768 MHz and is ideal for applications requiring precise timing such as in telecommunications equipment or industrial automation systems. With a compact size of D2.0XH6.2 (mm), it offers reliable performance from -10 to 60 °C temperatures.

FC-13532.7680KA-A

Epson Toyocom

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/FIRST YEAR; Drive Level: .5 uW; Load Capacitance: 12.5 pF;

Q13FC1350000400

Seiko Epson

Seiko Epson's Q13FC1350000400 crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 55000 ohm series resistance. Ideal for applications requiring precise timing such as in telecommunications, networking equipment, and industrial automation systems.

CX3225SB54000D0WPSC1

Kyocera

Quartz Crystals;

ABM8-12.000MHZ-16-B4-T

Abracon

ABM8-12.000MHZ-16-B4-T by Abracon is a 12 MHz crystal oscillator with 30 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, such as IoT devices and communication systems.

X14M745600L225

Ael Crystals

PARALLEL - FUNDAMENTAL; Mounting Feature: THROUGH HOLE MOUNT; Frequency Tolerance: 50 ppm; Aging: 5 PPM/FIRST YEAR; Frequency Stability: 50 %; Additional Features: HEIGHT 2.7 MM ALSO AVAILABLE;

ABS10-32.768KHZ-9-T

Abracon

Abracon's ABS10-32.768KHZ-9-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring a 0.032768 MHz nominal operating frequency, such as IoT devices and wearables due to its compact size and low power consumption.

ABM3C-11.0592MHZ-D4Y-T

Abracon

ABM3C-11.0592MHZ-D4Y-T by Abracon is a crystal oscillator with 30 ppm frequency tolerance and 30% stability. Operating at 11.0592 MHz, it features 60 ohm series resistance and -40 to 85 °C temperature range. Ideal for applications requiring precise timing in compact designs.

FA-23825.0000MB-C3

Seiko Epson

FA-23825.0000MB-C3 by Seiko Epson is a crystal oscillator with 25 MHz nominal frequency, 50 ppm tolerance, and 30% stability. Ideal for applications requiring precise timing in electronics due to its compact size and surface mount feature. Operating temperature range from -20°C to 70°C makes it versatile for various environments.

CC7V-T1A32.768KHZ12.5PF+/-20PPM

Micro Crystal Ag

Micro Crystal Ag's CC7V-T1A32.768KHZ12.5PF+/-20PPM is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing at frequencies around 0.032768 MHz in a compact surface mount package.

Q13FC1350000300

Seiko Epson

Seiko Epson's Q13FC1350000300 crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 55000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz, such as in telecommunications equipment or industrial automation systems.