Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

ECS-320-8-37B-CKY-TR3

Manufacturer

Ecs International
Manufacturer's Part Number

ECS-320-8-37B-CKY-TR3
Description

Quartz Crystals;
Datasheet

Datasheet

Not In Stock

Popular Products

2N2222A

Swampscott Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

MMBT2907ALT1G

Onsemi

MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.

Details

LM358N

NXP Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N2222A

General Transistor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

ULN-2803A

Vishay Sprague

Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.

Details

FSMLF327

Fox Electronics

FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.

Details

2N2222A

Asi Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SMBJ18CA

Rectron

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MMBF170LT1G

Onsemi

MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.

Details

1N4148

Forward International Electronics

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;

Details

1N4148

Laube Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM358MX

Texas Instruments

LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.

Details

SS14+

Multicomp Pro

SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.

Details

NC7WZ17P6X

Fairchild Semiconductor

BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;

Details

LM358N

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N7002

Formosa Microsemi

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;

Details

261

New England Microwave

Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;

Details

BAV99

Nexperia

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

1N4148

Multicomp Pro

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

Category Top Products

ECS-.327-12.5-12QS-TR

Ecs International

ECS-0.327-12.5-12QS-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 400% stability, and 90000 ohm series resistance. Ideal for applications requiring precise timing such as telecommunications equipment due to its low aging rate of 3 PPM/yr and operating temperature range from -40°C to 125°C.

ECS-.327-12.5-1210-TR

Ecs International

ECS-0.327-12.5-1210-TR by Ecs International is a crystal oscillator with a frequency tolerance of 20 ppm and frequency stability of 144%. It has a series resistance of 90000 ohm and is suitable for applications requiring precise timing in electronic devices.

CX2016DB25000H0FLJC1

Kyocera

Kyocera CX2016DB25000H0FLJC1 is a 25 MHz crystal oscillator with 10 ppm frequency tolerance and 15% stability. Ideal for applications requiring precise timing in temperatures ranging from -30 to 85°C. Features gold (Au) finish with nickel (Ni) barrier, surface mounting, and low drive level of 0.01 uW.

ABM8-25.000MHZ-D2X-T

Abracon

ABM8-25.000MHZ-D2X-T by Abracon is a 25 MHz crystal oscillator with 20 ppm frequency tolerance and 20% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C and features a parallel-fundamental crystal type. Suitable for surface mounting, it has a compact size of L3.2XB2.5XH0.8 (mm).

FC4STCBMF25.0-BAG200

Abracon

Abracon's FC4STCBMF25.0-BAG200 crystal oscillator offers 30 ppm frequency tolerance, 50% stability, and 30 ohm series resistance. Ideal for applications requiring a 25 MHz nominal operating frequency, such as telecommunications equipment and industrial automation systems.

CM7V-T1A32.768KHZ9PF+/-20PPMTAQC

Micro Crystal Ag

CM7V-T1A32.768KHZ9PF+/-20PPMTAQC by Micro Crystal Ag is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 126% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85°C and features a parallel-fundamental crystal type suitable for surface mount assemblies.

CA-20.000-18-3050-X

Aker Technology

CA-20.000-18-3050-X by Aker Technology is a 20 MHz crystal oscillator with 30 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C with through-hole mounting and low aging rate of 3 PPM/YEAR.

ABLS2-10.000MHZ-D4Y-T

Abracon

ABLS2-10.000MHZ-D4Y-T by Abracon is a 10 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85 °C, such as telecommunications and networking equipment.

FC-135R32.7680KA-A3

Seiko Epson

FC-135R32.7680KA-A3 by Seiko Epson is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as in telecommunications equipment or industrial automation systems. Operating temperature ranges from -40 to 85 °C with a compact size of 3.2mm x 1.5mm x 0.8mm for surface mount installation.

FK135EIHM0.032768-T3

Abracon

Abracon's FK135EIHM0.032768-T3 crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz in environments ranging from -40 to 85 °C.

NX3225SA-16.000000MHZ-T1

Nihon Dempa Kogyo

NX3225SA-16.000000MHZ-T1 by Nihon Dempa Kogyo is a 16 MHz crystal oscillator with 10 ppm frequency tolerance and 10% stability. Ideal for applications requiring precise timing in a compact surface-mount package, operating b/w -20°C to 70°C with gold terminal finish.

ABM3-18.432MHZ-D2Y-T

Abracon

ABM3-18.432MHZ-D2Y-T by Abracon is a 18.432 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems.

403C35E25M00000

Cts

The Cts 403C35E25M00000 crystal oscillator operates at 25 MHz with a frequency tolerance of ±30 ppm and stability of ±50%. Ideal for applications requiring precise timing, it features a parallel fundamental crystal type, gold over nickel terminal finish, and surface mounting feature.

TF162P32K7680R

Cts

The Cts TF162P32K7680R crystal oscillator offers a frequency tolerance of 20 ppm and stability of 108%. With a series resistance of 90000 ohm, it operates b/w -40 to 85 °C. Ideal for applications requiring precise timing such as communication systems or industrial automation.

FC-25532.7680K-A3

Seiko Epson

FC-25532.7680K-A3 by Seiko Epson is a crystal oscillator with a frequency tolerance of 20 ppm and frequency stability of 144%. It is commonly used in applications requiring precise timing, such as telecommunications and industrial automation.

NX3225SA-25.000M-STD-CRS-2

Nihon Dempa Kogyo

NX3225SA-25.000M-STD-CRS-2 by Nihon Dempa Kogyo is a 25 MHz crystal oscillator with 15 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in a temperature range of -40 to 125 °C, it features gold terminal finish and surface mounting.

NX3225GA-12.288M-STD-CRG-2

Nihon Dempa Kogyo

NX3225GA-12.288M-STD-CRG-2 by Nihon Dempa Kogyo is a crystal oscillator with 20 ppm frequency tolerance, 30% stability, and 100 ohm series resistance. Ideal for applications requiring a 12.288 MHz nominal operating frequency, such as in temperature-sensitive environments due to its -40 to 85 °C operating range and compact size of 3.2mm x 2.5mm x 0.75mm for surface mount installations.

FA-23824.0000MB-C0

Seiko Epson

FA-23824.0000MB-C0 by Seiko Epson is a crystal oscillator with 24 MHz nominal frequency, 50 ppm tolerance, and 30% stability. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, it features parallel fundamental type with nickel gold finish and surface mounting.

MC-30632.7680K-E3:ROHS

Seiko Epson

MC-30632.7680K-E3:ROHS by Seiko Epson is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as telecommunications and consumer electronics due to its compact size (8mm x 3.2mm x 2.54mm) and surface mounting feature.

MP060A

Cts

The Cts MP060A is a crystal oscillator with a frequency tolerance of 30 ppm and frequency stability of 50%. It is commonly used in applications requiring a nominal operating frequency of 6 MHz, such as telecommunications and consumer electronics.