Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SD53-4R7-R

Manufacturer

Eaton Corporation
Manufacturer's Part Number

SD53-4R7-R
Description

GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES; Maximum Rated Current: 2.1 A;
Datasheet

Datasheet

Not In Stock

Popular Products

M39029/56-351

Amphenol

CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;

Details

43025-0400

Molex

The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.

Details

2N7002,215

NXP Semiconductors

2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.

Details

MBRS130LT3G

Rochester Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Itt Components

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;

Details

1N4148

Renesas Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N7002

Dc Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;

Details

ST3485EBDR

STMicroelectronics

ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.

Details

KSZ9031RNXIC

Microchip Technology

KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.

Details

USB2514BI-AEZG

Standard Microsystems

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;

Details

SN65HVD234DR

Texas Instruments

SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.

Details

M85049/85-08W02

Glenair

CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;

Details

LL4148

International Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

Vpt Components

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;

Details

LL4148

Shanghai Lunsure Electronic Technology

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;

Details

1N4148

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SS14

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

USBLC6-2SC6

STMicroelectronics

USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.

Details

LL4148

Lite-on Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LL4148

Excel (Suzhou) Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SD53-4R7-R Technical Details

TYPE	DESCRIPTION
Construction:	Shielded
Shape or Size Description:	Rectangular Package
Case or Size Code:	2020
Packing Method:	Tape and Reel
Tolerance:	20 %
Package Length:	0.205 in (5.2 mm)
Surface Mount:	Yes
Inductor Type:	General Purpose Inductor
Minimum Operating Temperature:	-40 °C (-40 °F)
Maximum Rated Current:	2.1 A
Shielded:	Yes
Terminal Placement:	Dual Ended
No. of Functions:	1
No. of Terminals:	2
DC Resistance:	45 mΩ
Nominal Inductance (L):	4.7 μH
Package Style (Meter):	SMT
Core Material:	Ferrite
Terminal Shape:	Wraparound
Package Height:	0.118 in (3 mm)
Test Frequency:	100 kHz
Maximum Operating Temperature:	125 °C (257 °F)
Package Width:	0.205 in (5.2 mm)

Category Top Products

LLQ2012-F33NG

Toko

LLQ2012-F33NG by Toko is a surface mount fixed inductor with a nominal inductance of 0.033 uH. It is a general purpose inductor suitable for RF applications, with a max operating temperature of 125 °C and a max rated current of 0.5 A.

LGHK100515NJ-T

Taiyo Yuden

LGHK100515NJ-T by Taiyo Yuden is a 0402 surface mount inductor with 0.015 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C, 0.3 A rated current, and self-resonance frequency of 2300 MHz. Ideal for general purpose use due to its ferrite core material and high quality factor at L-nom.

XAL4020-102MEC

Coilcraft

Coilcraft XAL4020-102MEC is a shielded, surface mount inductor with 1uH nominal inductance and 9.6A max rated current. Ideal for power applications, it has a self-resonance frequency of 79MHz and operates b/w -40°C to 125°C.

DS1302

Falco Electronics

GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;

LQW15AN12NG00D

Murata Manufacturing

LQW15AN12NG00D by Murata is a wirewound chip inductor with 0.012 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and self-resonance frequency of 5500 MHz. This SMT inductor features dual-ended terminals and matte tin finish over nickel, making it ideal for general purpose use.

SRN6045-2R2Y

Bourns

Bourns SRN6045-2R2Y is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 3.5A max rated current. Ideal for power applications, it operates b/w -40 to 125°C with a self-resonance frequency of 35MHz.

33466

Vishay Intertechnology

GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; DC Resistance: .0108 ohm; Terminal Placement: RADIAL;

BWVS005050404R7M00

Chilisin Electronics

GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;

7447779122

Wuerth Elektronik & Kg

Wurth Elektronik 7447779122 is a shielded fixed inductor with 22uH nominal inductance, suitable for power applications. It has a max rated current of 1.41A and operates b/w -40 to 125°C. Ideal for general purpose use, this SMT inductor features nickel-zinc ferrite core material and dual-ended terminals.

MLZ2012N1R0LT000

TDK

MLZ2012N1R0LT000 by TDK is a shielded, surface mount fixed inductor with 1uH nominal inductance and 1.15A max rated current. Ideal for general purpose applications, it operates b/w -55 to 125°C and features a compact 0805 size package suitable for various electronic devices.

SRN4018-2R2M

Bourns

Bourns SRN4018-2R2M is a shielded fixed inductor with 2.2uH nominal inductance, 125°C max operating temp, and 20% tolerance. Ideal for power applications, it features dual-ended terminals, SMT package style, and ferrite core material for general purpose use.

32860

Vishay Intertechnology

GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Terminal Placement: RADIAL; Maximum Rated Current: 56.3 A;

74404042100

Wuerth Elektronik & Kg

Wurth Elektronik 74404042100 is a shielded SMT inductor with 10uH nominal inductance, 1.2A max current, and 0.15 ohm DC resistance. Ideal for power applications, it has dual-ended terminals and operates b/w -40 to 125°C. AEC-Q200 compliant, it's a general-purpose component in a compact 1615 package.

B82731T2801A020

TDK

B82731T2801A020 by TDK is a dual in-line fixed inductor with 15000 uH nominal inductance, 0.8 A max rated current, and -40 to 125 °C operating temperature range. Ideal for power applications, this general purpose inductor features a rectangular package style for PCB mount with 4 terminals and flat terminal shape.

5609

Bourns

The Bourns 5609 is a fixed inductor with 2500 uH nominal inductance, suitable for RF applications. Featuring radial terminal placement, it has a max operating temperature of 105°C and DC resistance of 2.04 ohm. Ideal for general purpose use, this cylindrical package inductor has a lead spacing of 18 mm.

MLZ2012M100WTD25

TDK

The TDK MLZ2012M100WTD25 is a 0805 fixed inductor with 10uH nominal inductance, 0.47 ohm DC resistance, and 0.35A max rated current. Ideal for general purpose applications, it features dual-ended terminals and ferrite core material, suitable for surface mount PCB designs requiring compact rectangular package sizes.

HC2LP-2R2-R

Coiltronics

GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; No. of Functions: 1;

LQP15MN10NG02D

Murata Manufacturing

LQP15MN10NG02D by Murata is a chip inductor with 0.01uH nominal inductance, 1.3 ohm DC resistance, and 13 min quality factor at 500 MHz. It is used as an RF inductor for general purpose applications requiring a self-resonance frequency of 4500 MHz. The dual-ended terminal placement and compact 0402 size make it suitable for surface mount installations.

636CY-220M=P3

Toko

636CY-220M=P3 by Toko is a shielded, surface mount fixed inductor with dual-ended terminals. It has a nominal inductance of 22uH and max rated current of 0.9A, suitable for DC-DC converter applications due to its general purpose design and ferrite core material.

MAKK2016T3R3M

Taiyo Yuden

MAKK2016T3R3M by Taiyo Yuden is a fixed inductor with 3.3uH nominal inductance, 1.15A max current, and -40 to 105°C operating range. Ideal for power applications, this SMT inductor features dual-ended terminals and metal core construction for efficient performance.