Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SD53-101-R

Manufacturer

Eaton Corporation
Manufacturer's Part Number

SD53-101-R
Description

GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES; DC Resistance: .801 ohm;
Datasheet

Datasheet

Not In Stock

Popular Products

MBRS140T3G

Onsemi

MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.

Details

MMSZ5245BT1G

Onsemi

MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.

Details

1N4148

American Power Devices

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148WT

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ABS25-32.768KHZ-1-T

Abracon

Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.

Details

LM317T

Integrated Power Semiconductors

Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;

Details

LM358M

Texas Instruments

LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.

Details

LM555CN

Texas Instruments

LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.

Details

NUP2105LT1G

Onsemi

NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.

Details

STM32F405RGT6

STMicroelectronics

STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.

Details

1554216002

Molex

WIRE AND CABLE;

Details

LAN8720A-CP-TR

Standard Microsystems

ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;

Details

BSS138

Inter F E T

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;

Details

BAV99

Nexperia

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;

Details

1N4148

Cheng-yi Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;

Details

LM2931AZ-5.0G

Onsemi

LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.

Details

LM358D-T

Philips Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

1N4148W-7-F

Multicomp Pro

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SD53-101-R Technical Details

TYPE	DESCRIPTION
Construction:	Shielded
Shape or Size Description:	Rectangular Package
Case or Size Code:	2020
Packing Method:	Tape and Reel
Tolerance:	20 %
Package Length:	0.205 in (5.2 mm)
Surface Mount:	Yes
Inductor Type:	General Purpose Inductor
Minimum Operating Temperature:	-40 °C (-40 °F)
Maximum Rated Current:	450 mA
Shielded:	Yes
Terminal Placement:	Dual Ended
No. of Functions:	1
No. of Terminals:	2
DC Resistance:	801 mΩ
Nominal Inductance (L):	100 μH
Package Style (Meter):	SMT
Core Material:	Ferrite
Terminal Shape:	Wraparound
Package Height:	0.118 in (3 mm)
Test Frequency:	100 kHz
Maximum Operating Temperature:	125 °C (257 °F)
Package Width:	0.205 in (5.2 mm)

Category Top Products

LQP15MN8N2B02D

Murata Manufacturing

Murata Manufacturing's LQP15MN8N2B02D is a chip inductor with 0.0082 uH nominal inductance, 1.1 ohm DC resistance, and 5500 MHz self-resonance frequency. Ideal for RF applications, this SMT inductor has dual-ended terminals and operates b/w -40 to 85 °C.

FSLB2520-470K

Toko

Toko's FSLB2520-470K is a surface mount fixed inductor with 47uH nominal inductance, 5.4 ohm DC resistance, and 15 MHz self-resonance frequency. Ideal for RF applications due to its rectangular package shape and ferrite core material. Operating temperature ranges from -40°C to 85°C making it suitable for various general purpose inductor needs.

LQW15AN1N7C80D

Murata Manufacturing

Murata Manufacturing's LQW15AN1N7C80D is a 0402 SMT RF inductor with 0.0017 uH nominal inductance, 1.15 A max rated current, and 18000 MHz self-resonance frequency. Ideal for general purpose applications requiring high Q factor at 250 MHz test frequency.

UP2B-470-R

Eaton Corporation

UP2B-470-R by Eaton Corp is a fixed inductor with 47uH nominal inductance, 1.4A max current, and -40 to 85°C operating temp range. Ideal for power applications, it features dual-ended terminals in a miniature cylindrical package suitable for SMT assembly.

SCD0504T-101K-N

Chilisin Electronics

Chilisin Electronics' SCD0504T-101K-N is a surface mount fixed inductor with 100uH nominal inductance, 0.7 ohm DC resistance, and 0.52A max rated current. Ideal for power applications, this general purpose inductor operates b/w -40°C to 105°C.

XFL4020-102MEC

Coilcraft

Coilcraft XFL4020-102MEC is a shielded, dual-ended power inductor with 1uH nominal inductance. Operating at -40 to 125°C, it has a max current of 11A and DC resistance of 0.0119 ohm. Ideal for general purpose applications requiring high performance in a compact SMT package.

NL252018-120JT

Venkel

Venkel's NL252018-120JT is a chip inductor with 12uH nominal inductance, suitable for RF applications. It operates at -20 to 100°C, with a max current of 0.15A and self-resonance frequency of 30MHz. Its compact size (2.5x2x1.8mm) and dual-ended terminals make it ideal for SMT designs requiring high-quality factor components.

IHLP6767GZER101M11

Vishay Intertechnology

Vishay Intertechnology's IHLP6767GZER101M11 is a shielded, surface mount fixed inductor with 100uH nominal inductance and 5A max rated current. Ideal for RF applications, this general purpose inductor has a self-resonance frequency of 2.1MHz and operates b/w -55°C to 125°C.

ASPIAIG-S8050-6R8M-T

Abracon

Abracon's ASPIAIG-S8050-6R8M-T is a shielded, surface mount fixed inductor with 6.8uH nominal inductance and 4.2A max rated current. Ideal for power applications, this general purpose inductor has a self-resonance frequency of 19MHz and operates b/w -40°C to 125°C.

XFL4020-222MEB

Coilcraft

Coilcraft XFL4020-222MEB is a shielded, surface mount power inductor with 2.2uH nominal inductance and 8A max rated current. Ideal for general purpose applications, it operates b/w -40 to 125°C, featuring a compact 4x4mm rectangular package suitable for various electronic devices.

IHLP3232DZER4R7M11

Vishay Intertechnology

Vishay Intertechnology's IHLP3232DZER4R7M11 is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 8A max rated current. Ideal for high current applications, this general purpose inductor has a self-resonance frequency of 17MHz and operates b/w -55°C to 125°C.

N1342AAA-0001Z=P3

Murata Manufacturing

GENERAL PURPOSE INDUCTOR; Manufacturer Series: FSDVA;

187LY-101J

Toko

187LY-101J by Toko is a fixed inductor with nominal inductance of 100uH, max rated current of 0.2A, and self-resonance frequency of 5.3MHz. It is designed for RF applications due to its cylindrical shape, radial terminal placement, and construction suitable for general purpose use.

DR74-4R7-R

Cooper Industries

GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;

DR125-102-R

Coiltronics

GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;

SRP1038A-470M

Bourns

Bourns SRP1038A-470M is a shielded, dual-ended SMT inductor with 47uH nominal inductance and 3A max rated current. Ideal for power applications, it operates b/w -55 to 150°C with a self-resonance frequency of 5MHz. AEC-Q200 compliant, this general-purpose inductor offers high quality factor and wraparound terminals.

7447709100

Wuerth Elektronik & Kg

Wurth Elektronik 7447709100 is a shielded fixed inductor with 10uH nominal inductance, 7.1A max current, and 21MHz self-resonance freq. Ideal for power applications, it features dual-ended terminals, SMT package style, and operates b/w -40 to 125°C.

XAL4040-103MEC

Coilcraft

Coilcraft's XAL4040-103MEC is a shielded, surface mount inductor with 10uH nominal inductance and 3.1A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 24MHz and DC resistance of 0.0924 ohm.

XAL4030-682MEC

Coilcraft

XAL4030-682MEC by Coilcraft is a surface mount, shielded fixed inductor with a nominal inductance of 6.8 uH and max rated current of 3.9 A. It is a general purpose inductor suitable for power applications, featuring a composite core material and operating temperature range from -40 to 125 °C.

LQM18PHR22MFRL

Murata Manufacturing

Murata Manufacturing's LQM18PHR22MFRL is a shielded, surface mount fixed inductor with dual-ended terminals. With a nominal inductance of 0.22uH and max rated current of 1.25A, it is ideal for power applications. This general purpose inductor has a self-resonance frequency of 100MHz and operates b/w -55 to 150°C, making it suitable for various electronic devices.