Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

FL2500213Z

Manufacturer

Diodes Incorporated
Manufacturer's Part Number

FL2500213Z
Description

CRYSTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 20 PPM/10 YEAR; Frequency Stability: 20 %; Physical Dimension: L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch);
Datasheet

Datasheet

Not In Stock

Popular Products

LM7805CT/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;

Details

1N4148

Rectron

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

BSS138BKW,115

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;

Details

BSS138-7-F

SPC TECHNOLOGY/ MULTICOMP

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

SDR0604-101KL

Bourns

SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.

Details

LM555CN

Texas Instruments

LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.

Details

ATMEGA328P-AU

Atmel

MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;

Details

LM107H/883C

General Electric Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;

Details

261

Micronetics

Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;

Details

M39029/58-360

Tri-star Electronics International

CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;

Details

BSS123NH6327XTSA1

Infineon Technologies

Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.

Details

SMBJ18CA

Goodwork Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138LT1G

Onsemi

BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.

Details

SMBJ18CA

Sangdest Microelectronics (Nanjing)

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M24308/2-1F

Esterline Technologies

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;

Details

1N4148WS

Cheng-yi Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Rectron

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358M

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

ULN2803ADWRG4

Texas Instruments

ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.

Details

FL2500213Z Technical Details

TYPE	DESCRIPTION
Load Capacitance:	20 pF
Other Names:	FL2500213ZTR FL2500213ZDKR FL2500213ZCT
Frequency Tolerance:	20 ppm
Frequency Stability:	20 %
Series Resistance:	30 ohm
Terminal Finish:	GOLD OVER NICKEL
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Drive Level:	300 uW
Nominal Operating Frequency:	25 MHz
Aging:	20 PPM/10 YEAR
Physical Dimension:	L3.2XB2.5XH0.65 (mm)/L0.126XB0.098XH0.026 (inch)
Crystal or Resonator Type:	CRYSTAL
Additional Features:	AT-CUT; TR, 7 INCH
Maximum Operating Temperature:	85 Cel

Category Top Products

HCM4924.000MABJ-UT

Citizen Finedevice

Citizen Finedevice's HCM4924.000MABJ-UT crystal oscillator offers 24 MHz nominal frequency, 30 ppm tolerance, and 50% stability. Ideal for applications requiring precise timing in a compact surface-mount package with -10 to 60 °C operating range.

9C-27.000MAAE-T

Txc

9C-27.000MAAE-T by Txc is a 27 MHz Crystal Oscillator with 30 ppm Frequency Tolerance and 30% Stability. Ideal for applications requiring precise timing in electronics, telecommunications, and industrial equipment due to its high accuracy and low aging rate of 5 PPM/YEAR.

X32K768L104

Ael Crystals

PARALLEL - FUNDAMENTAL; Mounting Feature: THROUGH HOLE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/FIRST YEAR; Load Capacitance: 12.5 pF; Physical Dimension: 2.9mm x 8.0mm;

CM200C32.768KDZF-UT

Citizen Finedevice

CM200C32.768KDZF-UT by Citizen Finedevice is a crystal oscillator with 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as precision timing in temperature ranges from -40 to 85 °C. It features surface mounting and compact dimensions of L7.9XB3.7XH2.4 (mm).

ABMM-6.000MHZ-B-2-T

Abracon

ABMM-6.000MHZ-B-2-T by Abracon is a 6 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems.

NX3225SA-24.000MHZ-STD-CSR-1

Nihon Dempa Kogyo

NX3225SA-24.000MHZ-STD-CSR-1 by Nihon Dempa Kogyo is a 24 MHz crystal oscillator with 15 ppm frequency tolerance and 15% stability. Ideal for applications requiring precise timing in a compact surface-mount design, it operates b/w -10°C to 70°C with gold terminal finish and 8 pF load capacitance.

CC7V-T1A32.768KHZ9PF+/-20PPM

Micro Crystal Ag

CC7V-T1A32.768KHZ9PF+/-20PPM by Micro Crystal Ag is a crystal oscillator with 20 ppm frequency tolerance, 126% frequency stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.

MA-40612.0000M-G0:ROHS

Seiko Epson

Seiko Epson's MA-40612.0000M-G0:ROHS crystal oscillator offers 12 MHz nominal frequency, 50 ppm tolerance, and 30% stability. Ideal for applications requiring precise timing in a temperature range of -20°C to 70°C, such as telecommunications equipment and industrial automation systems.

SC32S-7PF20PPM

Seiko Instruments Usa

SC32S-7PF20PPM by Seiko Instruments Usa is a crystal oscillator with 20 ppm frequency tolerance, 70000 ohm series resistance, and 0.032768 MHz nominal operating frequency. Ideal for applications requiring precise timing in temperature-sensitive environments.

TS192F33CDT

Cts

Cts TS192F33CDT crystal oscillator operates at 19.2 MHz with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in a temperature range of -20 to 70 °C, such as communication systems and industrial automation.

12.88667

Geyer Electronic

The Geyer Electronic 12.88667 crystal oscillator operates at 25 MHz with a frequency tolerance of ±30 ppm and stability of ±50%. It features a parallel fundamental type, nickel/gold terminal finish, and is ideal for applications requiring precise timing in temperatures ranging from -20°C to 70°C.

9HT7-32.768KDZF-T

Txc

9HT7-32.768KDZF-T by Txc is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 65000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in surface mount setups with -40 to 85 °C operating range.

FOXSLF/160-20-BAG200

Fox Electronics

FOXSLF/160-20-BAG200 by Fox Electronics is a 16 MHz crystal oscillator with 30 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20 to 70 °C, featuring a through-hole mount and PARALLEL - FUNDAMENTAL type.

7B-25.000MAAJ-T

Txc

7B-25.000MAAJ-T by Txc is a crystal oscillator with 25 MHz frequency, 30 ppm tolerance, and 30% stability. Ideal for applications requiring precise timing in electronics due to its compact size (5.0mm x 3.2mm x 0.9mm) and surface mount feature, operating b/w -20°C to 70°C efficiently.

ABM7-12.000MHZ-D-4-T

Abracon

ABM7-12.000MHZ-D-4-T by Abracon is a 12 MHz crystal oscillator with 30 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in a compact surface mount package, operating b/w -40 to 85 °C.

FA-12832.0000MF20X-K3

Seiko Epson

Seiko Epson's FA-12832.0000MF20X-K3 crystal oscillator offers 32 MHz nominal frequency with 10 ppm tolerance and 20% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C and features a surface mount design with gold over nickel terminal finish.

9B-48.000MFEQ-B

Txc

9B-48.000MFEQ-B by Txc is a crystal oscillator with 15 ppm frequency tolerance, 10% stability, and 80 ohm series resistance. Ideal for applications requiring precise timing at 48 MHz, such as telecommunications equipment or industrial automation systems. Operating temperature range from -20 to 70 °C.

FSRLF327-T3

Fox Electronics

FSRLF327-T3 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance and 144% stability. Ideal for applications requiring precise timing, it operates at 0.032768 MHz with a load capacitance of 12.5 pF. With surface mount feature and compact dimensions, it suits various electronic devices.

ABM11W-48.0000MHZ-4-D1X-T3

Abracon

Abracon's ABM11W-48.0000MHZ-4-D1X-T3 crystal oscillator offers 10 ppm frequency tolerance, 20% stability, and 60 ohm series resistance. Ideal for applications requiring a parallel-fundamental type crystal resonator with a nominal frequency of 48 MHz. Operating range from -40 to 85 °C, suitable for surface mount installations.

FC-12M32.7680KD-A3

Seiko Epson

FC-12M32.7680KD-A3 by Seiko Epson is a crystal oscillator with 30 ppm frequency tolerance, 144% stability, and 90000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz in a compact surface mount design. Operating temperature range from -40 to 85 °C ensures versatility in various environments.