Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

ATS040BSM-1E

Manufacturer

Cts
Manufacturer's Part Number

ATS040BSM-1E
Description

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/YEAR; Drive Level: 100 uW; Additional Features: AT CUT;
Datasheet

Datasheet

Not In Stock

Popular Products

SMBJ18CA

Bytesonic Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

NE555D

NXP Semiconductors

SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

CR0805-FX-10R0ELF

Bourns

Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.

Details

2N7002

NXP Semiconductors

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;

Details

LM107H

General Electric Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;

Details

BAV99

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138NH6327XTSA2

Infineon Technologies

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.

Details

DS18B20Z+

Analog Devices

DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

LM317AEMP/NOPB

Texas Instruments

LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.

Details

1N4148

Invensys Sensor Systems

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

2N2222A

Taitron Components

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;

Details

2N7002

Vishay Intertechnology

2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.

Details

1N4148WS

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;

Details

1N4148W-T

Micro Commercial Components

1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.

Details

SDR0604-101KL

Bourns

SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.

Details

LM358N

NXP Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

BAV99

Plessey Semiconductors Discrete Components Div

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

EU2B-YS303C

Idec

ROTARY SWITCH;

Details

ABS10-32.768KHZ-T

Abracon

Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.

Details

ATS040BSM-1E Technical Details

TYPE	DESCRIPTION
Load Capacitance:	18 pF
Frequency Tolerance:	30 ppm
Frequency Stability:	50 %
Series Resistance:	120 ohm
Terminal Finish:	TIN SILVER COPPER OVER NICKEL
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Drive Level:	100 uW
Nominal Operating Frequency:	4 MHz
Aging:	5 PPM/YEAR
Physical Dimension:	11.1mm X 4.83mm X 4.3 mm
Crystal or Resonator Type:	PARALLEL - FUNDAMENTAL
Additional Features:	AT CUT
Maximum Operating Temperature:	85 Cel

Category Top Products

ABM3B-27.000MHZ-B-1-G-T

Abracon

ABM3B-27.000MHZ-B-1-G-T by Abracon is a crystal oscillator with 10 ppm frequency tolerance, 15% stability, and 50 ohm series resistance. Ideal for applications requiring precise timing at 27 MHz, such as telecommunications equipment or industrial automation systems. Operating temperature range from -20°C to 70°C makes it versatile for various environments.

ABLS-25.000MHZ-12-F-T

Abracon

ABLS-25.000MHZ-12-F-T by Abracon is a 25 MHz crystal oscillator with 50 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w 0°C to 70°C with a low drive level of 100 uW.

TSX-322524.0000MF15X-AC6

Seiko Epson

TSX-322524.0000MF15X-AC6 by Seiko Epson is a 24 MHz crystal oscillator with 10 ppm frequency tolerance, 40 ohm series resistance, and GOLD OVER NICKEL terminal finish. Ideal for applications requiring precise timekeeping in compact electronic devices due to its small L3.2XB2.5XH0.6 (mm) dimensions and low drive level of 1 uW.

ABM8G-25.000MHZ-18-D-2-Y-T3

Abracon

Abracon's ABM8G-25.000MHZ-18-D-2-Y-T3 crystal oscillator offers 20 ppm frequency tolerance, 30% stability, and 60 ohm series resistance. Ideal for applications requiring a parallel fundamental crystal resonator with a nominal frequency of 25 MHz. Operating temperature ranges from -40 to 85 °C.

ABMM-25.000MHZ-B-2-T

Abracon

ABMM-25.000MHZ-B-2-T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 50% stability, and 40 ohm series resistance. Ideal for applications requiring precise timing at 25 MHz, such as telecommunications equipment or industrial automation systems. Operating temperature range from -20 to 70 °C with SILVER finish and surface mounting feature.

ABM7-12.000MHZ-D-2-Y

Abracon

ABM7-12.000MHZ-D-2-Y by Abracon is a 12 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85°C, featuring gold terminal finish and surface mounting feature.

ECS-80-20-4X

Ecs International

ECS-80-20-4X by Ecs International is a crystal oscillator with 8 MHz frequency, 30 ppm tolerance, and 50% stability. Ideal for applications requiring precise timing in temperature range of -10 to 70 °C, such as telecommunications equipment and industrial automation systems.

CM41532768EZFT

Citizen Finedevice

CM41532768EZFT by Citizen Finedevice is a crystal oscillator with 10 ppm frequency tolerance and 122% stability. Operating at 0.032768 MHz, it features a series resistance of 70k ohm and aging rate of 3 PPM/yr. Ideal for applications requiring precise timing in compact designs with surface mount capability.

MC-30632.768K-E3:ROHS

Seiko Epson

MC-30632.768K-E3:ROHS by Seiko Epson is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations at temperatures ranging from -40 to 85 °C.

ABM8AIG-40.000MHZ-12-2Z-T3

Abracon

ABM8AIG-40.000MHZ-12-2Z-T3 by Abracon is a 40 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in temperature ranges from -40 to 125 °C, such as telecommunications and industrial automation systems.

MP042-E

Cts

MP042-E by Cts is a crystal oscillator with 30 ppm frequency tolerance, 50% stability, and 50 ohm series resistance. Ideal for applications requiring precise timing at 4.9152 MHz, it operates b/w -40 to 85 °C with through-hole mounting and low aging rate of 5 PPM/year.

TSX-322516.0000MF18X-AC0

Seiko Epson

TSX-322516.0000MF18X-AC0 by Seiko Epson is a 16 MHz crystal oscillator with 10 ppm frequency tolerance and 18% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C, featuring GOLD OVER NICKEL terminal finish and PARALLEL - FUNDAMENTAL type.

ABS06-32.768KHZ-T

Abracon

Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.

ABM8G-24.000MHZ-18-D-2-Y-T3

Abracon

ABM8G-24.000MHZ-18-D-2-Y-T3 by Abracon is a crystal oscillator with a frequency tolerance of 20 ppm and stability of 30%. It has a series resistance of 60 ohm and is suitable for applications requiring precise timing, such as in communication systems or microcontrollers.

ABLS-4.000MHZ-B-2-T

Abracon

ABLS-4.000MHZ-B-2-T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 50% stability, and 180 ohm series resistance. Ideal for applications requiring a 4 MHz nominal operating frequency, such as IoT devices or communication systems.

402F25022IJR

Cts

Cts 402F25022IJR is a crystal oscillator with 25 MHz frequency, 20 ppm tolerance, and 20% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85 °C, such as communication devices and industrial equipment.

7B-25.000MAAJ-T

Txc

7B-25.000MAAJ-T by Txc is a crystal oscillator with 25 MHz frequency, 30 ppm tolerance, and 30% stability. Ideal for applications requiring precise timing in electronics due to its compact size (5.0mm x 3.2mm x 0.9mm) and surface mount feature, operating b/w -20°C to 70°C efficiently.

CM7V-T1A32.768KHZ6PF+/-10PPMTAQC

Micro Crystal Ag

Micro Crystal Ag's CM7V-T1A32.768KHZ6PF+/-10PPMTAQC is a crystal oscillator with 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing at frequencies around 0.032768 MHz in various electronic devices.

ABM7-20.000MHZ-D-2-Y-T

Abracon

ABM7-20.000MHZ-D-2-Y-T by Abracon is a 20 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems.

ABM3B-12.000MHZ-10-1-U-T

Abracon

ABM3B-12.000MHZ-10-1-U-T by Abracon is a crystal oscillator with 10 ppm frequency tolerance and 10% frequency stability. It has a series resistance of 70 ohm and is suitable for applications requiring a nominal operating frequency of 12 MHz, such as electronic devices and communication systems.