Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

221AMC10R

Manufacturer

Cts
Manufacturer's Part Number

221AMC10R
Description

ROTARY SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SP10T; Type (Actuator): ROTARY; Contact Function: BINARY CODED; Solderability: WAVE;
Datasheet

Datasheet

Not In Stock

Popular Products

BSS138

Yangzhou Yangjie Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;

Details

LM107H/883

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;

Details

USB2514BI-AEZG

Microchip Technology

USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.

Details

SS14

Hy Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58-360

TE Connectivity

TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.

Details

BAV99

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Jiangsu Changjiang Electronics Technology

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;

Details

LM555CMX

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

SMBJ18CA

Db Lectro

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Leshan Radio

RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;

Details

BAV99

Toshiba

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MURS160T3G

Onsemi

MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.

Details

LM107H

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;

Details

AT90CAN128-16AUR

Microchip Technology

AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.

Details

CR0805-FX-10R0ELF

Bourns

Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.

Details

1N4148

Micro Commercial Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

ULN2803ADW

Texas Instruments

ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.

Details

LM358N

Harris Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

M39029/58-360

Carlisle Interconnect Technologies

GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;

Details

221AMC10R Technical Details

TYPE	DESCRIPTION
Maximum DC Contact Current:	.1 A
No. of Positions:	10
Center Contact Plating:	GOLD
Center Contact Material:	BERYLLIUM COPPER
Type (Actuator):	ROTARY
Solderability:	WAVE
Switch Action:	CIRCULAR
Termination Type:	SOLDER
Electrical Life:	20000 Cycle(s)
Maximum Operating Temperature:	85 Cel
Contact Resistance:	80 mohm
Insulation Resistance:	1000000000 ohm
End Contact Material:	BERYLLIUM COPPER
Other Names:	CT3089CT CT3089TR CT3089DKR
Maximum DC Contact Voltage:	50 V
Dielectric Withstand Volts (V):	350VAC
Contact Function:	BINARY CODED
Packing Method:	TR
Switch Type:	ROTARY SWITCH
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT-STRAIGHT
Body Width:	.38 inch
Switch Function:	SP10T
Length (Actuator):	.27 inch
End Contact Plating:	GOLD
Body Height:	.2 mm
Body Length/Diameter:	.39 mm

Category Top Products

A22NW-2BL-TYA-G102-YD

Omron

ROTARY SWITCH;

SH-7050TA

Nidec Copal Electronics

SH-7050TA by Nidec Copal Electronics is a rotary coded switch with 16 positions and binary coded hexadecimal function. It has an electrical life of 10000 cycles, moisture-proof sealing, and gold terminal finish. Ideal for applications requiring latched switch action, surface mount-straight mounting feature, and operating temperatures ranging from -40 to 85°C.

A22NZ-3RL-TAA

Omron

ROTARY SWITCH;

A22NW-3BM-TGA-G102-GD

Omron

ROTARY SWITCH;

A22NS-2ML-NBA-G002-NN

Omron

ROTARY SWITCH;

M22-WK

Eaton Corporation

The Eaton Corporation M22-WK is a rotary switch with IP66 sealing, suitable for panel mounting. Featuring a thumb grip actuator and 2 positions, it has a body height of 19mm and operates b/w -25°C to 70°C. Ideal for applications requiring momentary switch action in corrosive environments.

EB3P-LSAN320-A

Idec

ROTARY SWITCH;

75CP36-01-2-05N

Grayhill

Grayhill's 75CP36-01-2-05N is a red rotary switch with DP5T function. It has gold-plated brass terminals, 10000 cycles electrical life, and 10000000000 ohm insulation resistance. Ideal for applications requiring a latched switch action, it offers 5 positions and features through-hole mounting with solder termination.

M3786/4-5466

Defense Logistics Agency

M3786/4-5466 by Defense Logistics Agency is a DP5T rotary switch with 2 sections, 5 positions, and latched switch action. It has an electrical life of 10000 cycles and is explosion-proof. With a max AC contact current of 2A@115VAC and DC contact current of 1.25A@28VDC, it's ideal for panel mount-threaded applications.

A22NZ-2ML-TYA

Omron

ROTARY SWITCH;

SRBM140700

Alps Electric

ROTARY SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Type (Actuator): ROTARY SHAFT; Solderability: HAND; PCB Hole Count: 10; Length (Bushing): .236 inch;

MRJE2604

TE Connectivity

TE Connectivity's MRJE2604 is a rotary switch with 6 sections, DP6T function, and gold over nickel plating. It has a max AC/DC contact current of 0.4A and voltage of 20V. Ideal for panel mounting applications requiring splashproof sealing and solder/wire termination.

CK1051

Lorlin Electronics

CK1051 by Lorlin Electronics is a 3P4T rotary switch with brass terminals, offering an electrical life of 10,000 cycles. With a max AC contact current of 1A and DC contact voltage of 24V, it is ideal for applications requiring reliable switching in temperatures ranging from -30°C to 85°C. The switch features gold-plated center contacts and glass-filled polyamide66 insulator material for enhanced performance.

PT65706

Apem Components

PT65706 by Apem Components is a 16-position rotary coded switch with BCH COMPLEMENT function. It has a body width of 10mm, height of 6.5mm, and operates b/w -20°C to 70°C. Ideal for applications requiring latched switch action, it features a cross-shaped slot actuator and matte tin terminal finish for solder termination in through-hole mounting setups.

A22W-2AG-24A-11

Omron

ROTARY SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPST; Type (Actuator): KNOB TYPE; Switch Action: LATCHED; Manufacturer Series: A22;

A22NW-2BL-TGA-P202-GD

Omron

ROTARY SWITCH;

EU2B-YS203C

Idec

ROTARY SWITCH;

711-6

Ohmite Manufacturing

Ohmite Manufacturing's 711-6 is a SP6T rotary switch with 6 positions, 20.6mm body height, and 39.6mm body length/diameter. It has a max AC contact current of 7A@125VAC and DC contact current of 7A@20VDC. Ideal for panel mount applications requiring a latched switch action with quick connect termination type.

A22NZ-3RB-NRA

Omron

ROTARY SWITCH;

S-7050ETB

Nidec Copal Electronics

The Nidec Copal Electronics S-7050ETB is a rotary coded switch with 16 positions and SP16T switch function. It features a stainless steel housing, copper alloy terminals, and gold plating for enhanced durability. Ideal for applications requiring binary coded contact functions, with an indexing angle of 22.5° and surface mount-straight mounting feature.