Image shown is a representation only. Exact specifications should be obtained from the product data sheet.
CRD10RM0SBR
-
ManufacturerC & K Components
-
Manufacturer's Part NumberCRD10RM0SBR
-
DescriptionROTARY CODED SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: BINARY CODED DECIMAL; Type (Actuator): FLUSH, SCREWDRIVER SLOT; Housing Material: POLYPHENYLENE SULPHIDE; Terminal Material: BRASS;
-
Datasheet
Not In Stock
Popular Products
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Details
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Details
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Details
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
Details
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Details
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Details
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
Details
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Details
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
Details
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Details
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Details
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
Details
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
Details
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Details
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Details
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
Details
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Details
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
Details
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DetailsCRD10RM0SBR Technical Details
| TYPE | DESCRIPTION |
|---|---|
| Maximum DC Contact Current: | .02 A |
| No. of Positions: | 10 |
| Center Contact Plating: | GOLD OVER NICKEL |
| Center Contact Material: | BERYLLIUM COPPER |
| Housing Material: | POLYPHENYLENE SULPHIDE |
| Body Color: | BLACK |
| Type (Actuator): | FLUSH, SCREWDRIVER SLOT |
| Maximum AC Contact Voltage: | 20 V |
| Terminal Finish: | GOLD NICKEL |
| Switch Action: | LATCHED |
| Terminal Material: | BRASS |
| Termination Type: | SOLDER |
| Electrical Life: | 20000 Cycle(s) |
| Maximum Operating Temperature: | 85 Cel |
| Material (Actuator): | POLYAMIDE |
| Contact Resistance: | 100 mohm |
| Insulation Resistance: | 1000000000 ohm |
| Color (Actuator): | RED |
| Maximum AC Contact Current: | .02 A |
| End Contact Material: | BERYLLIUM COPPER |
| Other Names: | *CRD10RM0SBR CKN10856 CRD10RM0SBR-NDL Q9263169 CKN10856TR CRD10RM0SBR-ND -CRD10RM0SBR CKN10856CT CKN10856-ND |
| No. of Switch Sections: | 1 |
| Maximum DC Contact Voltage: | 20 V |
| DC Maximum Rating R Load (Contact): | .02A@20VDC |
| Dielectric Withstand Volts (V): | 300VAC |
| Packing Method: | TAPE AND REEL |
| Switch Type: | ROTARY CODED SWITCH |
| AC Maximum Rating R Load (Contact): | .02A@20VAC |
| Indexing Angle: | 36 deg |
| JESD-609 Code: | e4 |
| Minimum Operating Temperature: | -20 Cel |
| Mounting Feature: | SURFACE MOUNT-STRAIGHT |
| Body Width: | 10 inch |
| Switch Function: | BINARY CODED DECIMAL |
| End Contact Plating: | GOLD OVER NICKEL |
| Insulator Material: | POLYPHENYLENE SULPHIDE |
| Body Height: | 6.51 mm |
| Additional Features: | ROHS COMPLIANT |
| Body Length/Diameter: | 10 mm |