Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

CJ78L05

Manufacturer

Bytesonic Electronics
Manufacturer's Part Number

CJ78L05
Description

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 5 %; No. of Outputs: 1; Maximum Load Regulation: .06 %;
Datasheet

Datasheet

Not In Stock

Popular Products

BAV99

Sprague Electric

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;

Details

BSS138NH6327XTSA2

Infineon Technologies

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.

Details

1N4148

National Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

08055C104KAT4A

KYOCERA AVX

08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

M24308/2-1F

Esterline Technologies

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;

Details

1N4148

Microsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SS14

Changzhou Starsea Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WSF-7

Diodes Incorporated

1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.

Details

1N4148WT

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Itt Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

MBRS3200T3G

Onsemi

MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.

Details

KSZ9031RNXIC

Micrel

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;

Details

2N2222A

Micro Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N7002

Vishay Intertechnology

2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.

Details

LM358DR2G

Onsemi

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

Details

BSS138

Diodes Incorporated

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

Details

1N5819HW-7-F

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDD5614P

Onsemi

FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.

Details

ABS10-32.768KHZ-T

Abracon

Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.

Details

CJ78L05 Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Line Regulation:	.15 %
Sub-Category:	Other Regulators
Surface Mount:	NO
No. of Outputs:	1
Maximum Output Current-1:	.1 A
Maximum Voltage Tolerance:	5 %
No. of Terminals:	3
Package Equivalence Code:	SIP3,.1,50
Terminal Position:	SINGLE
Nominal Dropout Voltage-1:	1.7 V
Technology:	BIPOLAR
Operating Temperature (TJ-Min):	0 Cel
Maximum Load Regulation:	.06 %
Nominal Output Voltage-1:	5 V
Adjustability:	FIXED
Operating Temperature (TJ-Max):	125 Cel
Terminal Pitch:	1.27 mm
Qualification Status:	Not Qualified
Maximum Input Voltage Absolute:	30 V

Category Top Products

5962R1422801VXC

Texas Instruments

Texas Instruments' 5962R1422801VXC is a DDR termination regulator with 16 terminals. It offers a min output voltage of 0.6 V and can handle a max output current of 3 A. This ceramic, metal-sealed co-fired device is ideal for applications requiring radiation tolerance up to 100k Rad(Si).

UA78M24CKD

Texas Instruments

Other Regulators; No. of Terminals: 3; Maximum Voltage Tolerance: 5 %; Package Equivalence Code: SIP3,.1TB; Terminal Pitch: 2.54 mm; Nominal Output Voltage-1: 24 V;

LM723H

Rca Solid State

Other Regulators; No. of Terminals: 10; Terminal Form: WIRE; Qualification Status: Not Qualified; Minimum Output Voltage-1: 2 V; Package Body Material: METAL;

LM317LZ-TR

Motorola

Other Regulators; No. of Terminals: 3; Nominal Dropout Voltage-1: 3 V; Technology: BIPOLAR; Packing Method: TR; No. of Outputs: 1;

LM723J/883C

National Semiconductor

LM723J/883C by National Semiconductor is a MIL-STD-883 Class C regulator with adjustable output voltage range from 2V to 37V. It features bipolar technology, operates b/w -55°C to 125°C, and has 14 terminals in a rectangular ceramic package. Ideal for various applications requiring precise voltage regulation in harsh environments.

LM209K

STMicroelectronics

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 7 %; Package Equivalence Code: TO-204/-3; Package Body Material: METAL;

TS78L05CT

Taiwan Semiconductor

TS78L05CT by Taiwan Semiconductor is a 3-terminal fixed voltage regulator with an output of 5V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications. With a max load regulation of 0.06% and input voltage up to 35V, it ensures stable performance in electronic circuits.

LM317T

Inchange Semiconductor

Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;

LP2997MRX/NOPB

Texas Instruments

LP2997MRX/NOPB by Texas Instruments is a DDR termination regulator with a max output current of 0.5A and min output voltage of 0.9V. This surface-mount device in a small outline package is ideal for applications requiring low-profile regulators, such as portable electronics and computer peripherals.

SN0211032DBVT

Texas Instruments

Other Regulators; No. of Terminals: 5; Package Code: TSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 10 V; Maximum Voltage Tolerance: 4 %;

SN72723N

Texas Instruments

Other Regulators; No. of Terminals: 14; Package Code: DIP; Terminal Form: THROUGH-HOLE; Technology: BIPOLAR; No. of Outputs: 1;

XC6204B452MR-G

Torex Semiconductor

XC6204B452MR-G by Torex Semiconductor is a CMOS regulator with 4.5V output voltage, 2% voltage tolerance, and 0.1A output current. Ideal for applications requiring a small outline thin profile package, it operates b/w -40 to 85°C and can handle up to 12V input voltage with excellent load regulation of 0.08%.

LP2985AIM5-4.5/NOPB

National Semiconductor

Other Regulators; No. of Terminals: 5; Package Code: TSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 3.5 %;

LM305P1

Texas Instruments

Texas Instruments' LM305P1 is an 8-terminal bipolar regulator with adjustable output voltage ranging from 4.5V to 40V. It features a through-hole terminal form, plastic/epoxy package body material, and operates b/w 0°C to 70°C. Ideal for various applications requiring precise voltage regulation in a rectangular package style.

LT3007ETS8-5#TRMPBF

Analog Devices

Analog Devices' LT3007ETS8-5#TRMPBF is a bipolar technology regulator with 5V output voltage, 2% voltage tolerance, and -40 to 125°C operating temperature range. Ideal for applications requiring precise voltage regulation in compact spaces due to its small outline package and dual terminal position.

LM305AP

Texas Instruments

Other Regulators; No. of Terminals: 8; Package Code: DIP; Terminal Form: THROUGH-HOLE; Package Equivalence Code: DIP8,.3; Package Style (Meter): IN-LINE;

LP2996MR

Texas Instruments

DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HLSOP; Terminal Form: GULL WING; Terminal Pitch: 1.27 mm; Length: 4.9 mm;

UA78L12ACLPP3

Texas Instruments

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Maximum Load Regulation: .1 %; Terminal Position: SINGLE;

UA7918CKCP1

Texas Instruments

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Surface Mount: NO;

LM117HVH/883C

National Semiconductor

LM117HVH/883C by National Semiconductor is a MIL-STD-883 Class C screened BIPOLAR regulator with an adjustable output voltage range from 1.2V to 57V and max load regulation of 1%. Ideal for applications requiring precise voltage regulation in harsh environments with operating temperatures ranging from -55°C to 150°C.