Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

INA126P

Manufacturer

Burr-Brown Corporation
Manufacturer's Part Number

INA126P
Description

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

2N7002

Onsemi

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;

Details

LM107H

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

2N7002

Jiangsu Changjiang Electronics Technology

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;

Details

SS14

Vishay Intertechnology

Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.

Details

LL4148

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

CRCW080510R0FKEA

Vishay Intertechnology

Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.

Details

BAV99

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRG0805F10R

TE Connectivity

TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.

Details

SS14

Promax-johnton

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N2222A

Good-ark Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;

Details

FDC5614P

MSKSEMI SEMICONDUCTOR

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;

Details

LM555CN

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

M85049/85-08W02

TE Connectivity

CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;

Details

1552200253

Molex

WIRE AND CABLE;

Details

1N4148

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

Lite-on Technology

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;

Details

STM32F407VGT6

STMicroelectronics

STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).

Details

INA126P Technical Details

TYPE	DESCRIPTION
Package Body Material:	Plastic/Epoxy
Nominal Bandwidth (3dB):	200 kHz
Maximum Supply Voltage Limit:	18 V
Sub-Category:	Instrumentation Amplifiers
Maximum Supply Current:	200 μA
Surface Mount:	No
Terminal Finish:	Tin/Lead
No. of Terminals:	8
Maximum Input Offset Voltage:	250 µV
Terminal Position:	Dual
Package Style (Meter):	In-Line
JESD-30 Code:	R-PDIP-T8
Minimum Voltage Gain:	5
Package Shape:	Rectangular
Terminal Form:	Through-Hole
Maximum Operating Temperature:	85 °C (185 °F)
Package Code:	DIP
Amplifier Type:	Instrumentation Amplifier
Nominal Slow Rate:	0.4 V/us
Maximum Voltage Gain:	10000
Maximum Non Linearity:	0.012 %
Nominal Negative Supply Voltage (Vsup):	-15 V
JESD-609 Code:	e0
Minimum Operating Temperature:	-40 °C (-40 °F)
Maximum Average Bias Current (IIB):	25 nA
No. of Functions:	1
Qualification:	No
Minimum Common Mode Reject Ratio:	83 dB
Package Equivalence Code:	DIP8,.3
Nominal Supply Voltage / Vsup (V):	15 V
Maximum Negative Supply Voltage Limit:	-18 V
Terminal Pitch:	0.1 in (2.54 mm)
Maximum Input Offset Current (IIO):	2 nA
Temperature Grade:	Industrial
Power Supplies (V):	±15 V

Category Top Products

AD621BRZ-RL

Analog Devices

AD621BRZ-RL by Analog Devices is an instrumentation amplifier with a max input offset voltage of 215uV and max average bias current of 0.0015uA. It operates at a nominal voltage of +-15V, making it ideal for industrial applications requiring precise signal amplification in tight spaces.

INA129UA

Burr-Brown Corporation

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

INA118U

Burr-Brown Corporation

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

INA333AIDGKT

Texas Instruments

INA333AIDGKT by Texas Instruments is an instrumentation amplifier with 25uV max input offset voltage, 0.0002uA max average bias current, and 100dB min common mode reject ratio. Ideal for automotive applications due to its small outline package and wide operating temperature range of -40 to 125°C.

XINA823DGKR

Texas Instruments

XINA823DGKR by Texas Instruments is an instrumentation amplifier with 190uV max input offset voltage, 0.01uA max average bias current, and 1.9MHz nominal bandwidth. Ideal for precision signal amplification in applications requiring high gain accuracy and low noise levels.

LT1167CS8-1#TRPBF

Linear Technology

INSTRUMENTATION AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

AMP03GSZ-RL

Analog Devices

AMP03GSZ-RL by Analog Devices is an instrumentation amplifier with 2000uV max input offset voltage, 3MHz nominal bandwidth, and 75dB min CMRR. Ideal for industrial applications requiring precise signal amplification in a compact package.

ISL28533FVZ-T7A

Renesas Electronics

ISL28533FVZ-T7A by Renesas Electronics is an instrumentation amplifier with a max input offset voltage of 10uV and max supply current of 3.5mA. It is designed for automotive applications, featuring a temperature grade of AUTOMOTIVE and high common mode reject ratio of 97dB. The package style is SMALL OUTLINE, THIN PROFILE, SHRINK PITCH with surface mount capability.

INA118U/2K5

Burr-Brown Corporation

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

AD626BN

Analog Devices

AD626BN by Analog Devices is an instrumentation amplifier with a max input offset voltage of 2500 uV and a nominal voltage of 5 V. With a min voltage gain of 10, it finds application in industrial settings for precise signal amplification tasks. Its compact rectangular package makes it suitable for space-constrained environments.

AD623ANZ

Analog Devices

AD623ANZ by Analog Devices is an instrumentation amplifier with a max input offset voltage of 350 uV, max average bias current of 0.0275 uA, and a nominal bandwidth of 0.8 MHz. It is commonly used in industrial applications requiring precise amplification and signal conditioning.

XTR105UA

Burr-Brown Corporation

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Shape: RECTANGULAR; Minimum Common Mode Reject Ratio: 86 dB;

AD8227ARZ-RL

Analog Devices

AD8227ARZ-RL by Analog Devices is an instrumentation amplifier with a max input offset voltage of 200uV and max average bias current of 0.027uA. It operates at a nominal voltage of 15V, making it suitable for automotive applications requiring precise signal amplification in tight spaces.

LTC6373IDFM#PBF

Analog Devices

LTC6373IDFM#PBF by Analog Devices is a CMOS instrumentation amplifier with a max input offset voltage of 275 uV and max average bias current of 0.00005 uA. It is used in applications requiring high precision amplification, such as medical devices and industrial control systems.

PGA202KP

Texas Instruments

INSTRUMENTATION AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;

INA114BUE4

Texas Instruments

INA114BUE4 by Texas Instruments is a plastic/epoxy instrumentation amplifier with a max input offset voltage of 50 uV and a max average bias current of 0.002 uA. It is commonly used in industrial applications for its high common mode reject ratio and wide temperature range.

INA2126E/2K5

Texas Instruments

INA2126E/2K5 by Texas Instruments is a dual-function instrumentation amplifier with a max input offset voltage of 250uV and max bias current of 0.025uA. It operates at a nominal voltage of +-15V, making it suitable for industrial applications requiring precise signal amplification in tight spaces. With a small outline package style and high voltage gain up to 10000, this amplifier offers excellent performance in compact designs.

INA2128U

Texas Instruments

INA2128U by Texas Instruments is a 2-function instrumentation amplifier with max input offset voltage of 100uV and max bias current of 0.005uA. Ideal for industrial applications, it operates at -40 to 85 °C with nominal bandwidth of 1.3MHz, offering a max voltage gain of 10,000.

INA217AIDWT

Texas Instruments

INA217AIDWT by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 250uV and max average bias current of 12uA. It operates at a nominal voltage of +-15V, has a bandwidth of 3.4MHz, and is suitable for automotive applications due to its temperature grade.

AD8420BRMZ-RL

Analog Devices

AD8420BRMZ-RL by Analog Devices is an instrumentation amplifier with +-2.7/+-18/2.7/36 V power supplies, 8 terminals, and 0.09 mA max supply current. It is designed for automotive applications, operates b/w -40 to 125 °C, and comes in a small outline square package suitable for surface mount assembly.