Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

13711548

Manufacturer

Aptiv
Manufacturer's Part Number

13711548
Description

CONNECTOR ACCESSORY; Material: COPPER ALLOY; Additional Features: CONTACT FINISH: GOLD; Minimum Cable Entry: .0669 inch; Cable Types: FLRY-B; DIN Conformity: NO;
Datasheet

Datasheet

Not In Stock

Popular Products

ABS25-32.768KHZ-1-T

Abracon

Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.

Details

LL4148

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

E8WSDC12-32.768KTR

Abracon

Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.

Details

2N2222A

Bharat Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N7002

Fairchild Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

LM555CN

Rca Solid State

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

LM358MX

Texas Instruments

LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.

Details

ULN-2803A

Vishay Sprague

Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.

Details

2N2222A

Micropac Industries

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BAV99

Zetex Plc

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

EPCS4SI8N

Intel

EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.

Details

LM317AEMP/NOPB

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;

Details

SMBJ18CA

Secos

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Vishay Intertechnology

Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.

Details

BAV99

Jiangsu Changjiang Electronics Technology

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;

Details

LM107H

Raytheon Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;

Details

1N4148

Multicomp Pro

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1554216002

Molex

WIRE AND CABLE;

Details

SDR0604-101KL

Bourns

SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.

Details

13711548 Technical Details

TYPE	DESCRIPTION
MIL Conformity:	NO
Minimum Cable Entry:	.0669 inch
Contact Gender:	FEMALE
Connector Accessory Type:	CONNECTOR ACCESSORY
Assembly Item Name:	CONTACT
Terminal Type:	CRIMP
IEC Conformity:	NO
Additional Features:	CONTACT FINISH: GOLD
Material:	COPPER ALLOY
DIN Conformity:	NO
Maximum Cable Entry:	.0827 inch
Cable Types:	FLRY-B

Category Top Products

2-2154857-1

TE Connectivity

TE Connectivity's 2-2154857-1 is a POWER assembly product with a rated voltage of 250V and max operating temperature of 105°C. It can handle wire sizes up to 0 AWG and has a rated current of 4A. This versatile copper alloy component is commonly used in applications requiring high power transmission.

C88E000218

Northern Technologies

CONNECTOR ACCESSORY; Usage: CM CONNECTOR; Mounting Option-2: SCREW; Material: ZINC ALLOY; IEC Conformity: NO; MIL Conformity: NO;

5-962885-1

TE Connectivity

TE Connectivity 5-962885-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 22 AWG, rated for 7.5A current. Ideal for applications requiring female contact gender and cable entry from 0.043" to 0.063", operating b/w -40°C to 140°C temperature range.

M85049/88-19W03

TE Connectivity

CONNECTOR ACCESSORY; Shell Sizes: 19; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Material: ALUMINUM ALLOY; Maximum Operating Temperature: 175 Cel;

43031-0002

Molex

The Molex 43031-0002 CONTACT features a CRIMP terminal type with CHAIN contact design. It supports wire sizes from 24 AWG to 20 AWG and has a max cable entry of 0.073 inch. Ideal for use in assemblies such as 43020, 43640, and 44300.

3030213

Phoenix Contact

TERMINAL BLOCK ACCESSORY; Assembly Item Name: JUMPER; Material: COPPER; Approvals (V): UL; MIL Conformity: NO; IEC Conformity: NO;

2411-002-1805

TE Connectivity

CONNECTOR ACCESSORY; Contact Gender: FEMALE; Wire Gauge (AWG): 0; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel;

12124075

Delphi Connection Systems

CONNECTOR ACCESSORY; Terminal Length: .224 inch; IEC Conformity: NO; Mounting Style: STRAIGHT; MIL Conformity: NO; DIN Conformity: NO;

12048159

Aptiv

The Aptiv 12048159 is a CRIMP CONTACT with MALE gender and BLADE PIN-SOCKET style. It has a min cable entry of 0.08" and max cable entry of 0.123". Ideal for applications requiring straight mounting, such as automotive or industrial assemblies.

DF1B-2022SCF

Hirose Electric

The Hirose Electric DF1B-2022SCF is a CRIMP terminal CONTACT with FEMALE gender and SQ PIN-SKT style. Made of BRASS, it is used in STRAIGHT mounting applications. Ideal for assembly products requiring reliable electrical connections.

CP-MSTB

Phoenix Contact

CONNECTOR ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: CODING ITEM; MIL Conformity: NO;

030-2409-003

Itt Cannon

ITT Cannon 030-2409-003 is a crimp terminal contact with copper alloy material. It supports wire sizes from 22 AWG to 20 AWG, rated for 5A current. Ideal for flat cable applications requiring female signal contacts with blade pin-socket design.

7810.6519.0

Molex

CONNECTOR ACCESSORY;

A114017-SR

Amphenol

CONNECTOR ACCESSORY; Manufacturer Series: AT-SR;

W12S-P012

TE Connectivity

TE Connectivity's W12S-P012 is a POWER AND SIGNAL WEDGE LOCK with max. operating temp of 125°C and min. of -55°C. Supports wire size up to 0 AWG, made of POLYBUTYLENE TEREPHTHALATE. Ideal for assembly applications requiring secure power and signal connections in various environments.

50394-8100

Molex

Molex 50394-8100 is a crimp terminal with a contact design of loose and bellowed contact style. It has a finish thickness of 15 and is commonly used in assembly products for applications requiring female contacts, straight mounting style, and 0.093 inch terminal length.

1534809-1

TE Connectivity

TE Connectivity 1534809-1 backshell has 3 shell sizes, shielding, and 0.189" min cable entry. Ideal for applications requiring steel material, it accommodates up to 0 AWG wire size with 0.433" max cable entry. Mounting options include screw and 14702 for secure installation.

181270-2

TE Connectivity

TE Connectivity's 181270-2 CONTACT features CRIMP terminal type, rated voltage of 40V, and wire gauge of 23 AWG. Ideal for SIGNAL applications with a max operating temperature of 80°C and contact resistance of 7 mΩ.

43031-0007

Molex

Molex 43031-0007 CONTACT features loose contact design, suitable for 24-20 AWG wires. With a 0.073" min cable entry and 0.137" terminal length, it is ideal for use with 43020, 43640, and 44300 assemblies. Made of phosphor bronze, this male contact has a straight mounting style.

16-02-0114

Molex

CONNECTOR ACCESSORY;