Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

OP07CSZ

Manufacturer

Analog Devices
Manufacturer's Part Number

OP07CSZ
Description

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

SMBJ18CA

Protek Devices

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ABS25-32.768KHZ-T

Abracon

Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.

Details

1N4148WS

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SBAV99LT1G

Onsemi

SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.

Details

LM317TG

Texas Instruments

LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.

Details

2N7002

Motorola

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;

Details

1N4148WS

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

PAP-06V-S

J S T Mfg

PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.

Details

BAV99

Bkc Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Diotec Semiconductor Ag

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;

Details

MMBT3904-7-F

Diodes Incorporated

Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.

Details

BAV99

Jiangsu Changjiang Electronics Technology

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;

Details

BSS138

Fairchild Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;

Details

SS14

Promax-johnton

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99WT1G

Onsemi

BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.

Details

M39029/56-351

TE Connectivity

TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.

Details

1N4148

Semitron

RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;

Details

2N2222A

North American Philips Discrete Products Div

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

NDT2955

Onsemi

NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.

Details

OP07CSZ Technical Details

TYPE	DESCRIPTION
Package Body Material:	Plastic/Epoxy
Maximum Seated Height:	0.069 in (1.75 mm)
Frequency Compensation:	Yes
Maximum Supply Voltage Limit:	22 V
Maximum Bias Current (IIB) @25C:	7 nA
Sub-Category:	Operational Amplifiers
Surface Mount:	Yes
Terminal Finish:	Matte Tin
No. of Terminals:	8
Minimum Slew Rate:	0.1 V/us
Maximum Input Offset Voltage:	250 uV
Nominal Unity Gain Bandwidth:	600 kHz
Terminal Position:	Dual
Package Style (Meter):	Small Outline
Technology:	BIPOLAR
JESD-30 Code:	R-PDSO-G8
Low-Offset:	Yes
Minimum Voltage Gain:	100000
Package Shape:	Rectangular
Terminal Form:	Gull Wing
Maximum Operating Temperature:	85 °C (185 °F)
Package Code:	SOP
Amplifier Type:	Operational Amplifier
Nominal Slow Rate:	0.3 V/us
Width:	0.154 in (3.9 mm)
Moisture Sensitivity Level (MSL):	1
Architecture:	Voltage Feedback
Nominal Common Mode Reject Ratio:	120 dB
Nominal Negative Supply Voltage (Vsup):	-15 V
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 °C (-40 °F)
Maximum Average Bias Current (IIB):	9 nA
No. of Functions:	1
Qualification:	No
Minimum Common Mode Reject Ratio:	97 dB
Package Equivalence Code:	SOP8,.25
Length:	0.193 in (4.9 mm)
Nominal Supply Voltage / Vsup (V):	15 V
Peak Reflow Temperature (C):	260 °C (500 °F)
Maximum Negative Supply Voltage Limit:	-22 V
Terminal Pitch:	0.05 in (1.27 mm)
Temperature Grade:	Industrial
Power Supplies (V):	±15 V

Category Top Products

INA133UA/2K5

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

1426

Teledyne Technologies

OPERATIONAL AMPLIFIER; Temperature Grade: OTHER; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; No. of Functions: 1;

MCP6001T-E/OT

Microchip Technology

MCP6001T-E/OT by Microchip Technology is a CMOS Operational Amplifier with 5 terminals, Vsup of 2-5V, and low power consumption at 0.17mA. It has a wide temperature range from -40 to 125°C and is ideal for automotive applications due to its small size and high common mode rejection ratio of 76dB.

LM7321MFX

Texas Instruments

LM7321MFX by Texas Instruments is an Operational Amplifier with 6000uV Max Input Offset Voltage, 80dB CMRR, and 16000kHz Unity Gain Bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and small outline package style.

OPA1652AIDGKR

Texas Instruments

OPA1652AIDGKR by Texas Instruments is a CMOS operational amplifier with low bias current of 0.0001 uA, high common mode rejection ratio of 110 dB, and wide supply voltage range of +-2.25/+-18/4.5/36 V. Ideal for industrial applications requiring precise signal amplification in compact designs due to its small outline package and temperature grade up to 85 °C.

JM38510/11405BGA

Precision Monolithics

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; No. of Functions: 1;

LM2904M

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

LM258DT

STMicroelectronics

LM258DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 7000 uV and a nominal common mode reject ratio of 60 dB. It operates on a supply voltage range of +-1.5/+-15/3/30 V, making it suitable for industrial applications requiring precise signal amplification in compact designs. With its small outline package style and low bias current, this op amp is ideal for temperature-sensitive environments where high gain bandwidth and low power consumption are essential.

TL072CP

Motorola

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

JM38510/13501BPA

Analog Devices

JM38510/13501BPA by Analog Devices is an Operational Amplifier with 60uV Max Input Offset Voltage, 106dB CMRR, and 600kHz Unity Gain Bandwidth. Ideal for military applications due to its MIL-TEMP rating, it operates b/w -55°C to 125°C with a supply voltage of ±15V.

LM2904MX

ROHM

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;

LM741H

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;

OPA551UA/2K5G4

Texas Instruments

OPA551UA/2K5G4 by Texas Instruments is an Operational Amplifier with a max input offset voltage of 5000 uV, common mode reject ratio of 102 dB, and unity gain bandwidth of 3000 kHz. Ideal for automotive applications, it operates at temperatures ranging from -40 to 125 °C and supports power supplies of +-4/+-30/8/60 V.

INA132U/2K5

Texas Instruments

Texas Instruments' INA132U/2K5 is an operational amplifier with 250uV max input offset voltage and 90dB nominal CMRR. Ideal for applications requiring a small outline package, it operates b/w -40 to 85°C with a supply voltage of ±15V. The op amp features low-offset, VFB architecture, and consumes only 0.185mA max supply current.

LT1014DSW#PBF

Analog Devices

LT1014DSW#PBF by Analog Devices is a quad operational amplifier with 400uV max input offset voltage, 113dB nominal CMRR, and 0.038uA max average bias current. Ideal for precision signal processing in commercial temperature range applications.

OPA277UAE4

Texas Instruments

OPA277UAE4 by Texas Instruments is an operational amplifier with low-offset and micropower features. It offers a max input offset voltage of 100uV, nominal voltage of +/-15V, and a min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.

LM258D

NXP Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

LM741CN

Rochester Electronics

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO;

INA200AIDGKRG4

Texas Instruments

Texas Instruments' INA200AIDGKRG4 is an operational amplifier with a max input offset voltage of 2500uV and max average bias current of 16uA. It operates in a temperature range from -40 to 125 °C and is ideal for automotive applications due to its compact size, low power consumption, and high common mode voltage tolerance up to 80V.

LM741CN

Harris Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;