Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
1,478	$2.708	$4,001.685

MAX3232CSE+

Manufacturer

Analog Devices
Manufacturer's Part Number

MAX3232CSE+
Description

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

1478 In Stock

Popular Products

LM107H/883

Rochester Electronics

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;

Details

LL4148

Leshan Radio

RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;

Details

M39029/58-360

Defense Logistics Agency

CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;

Details

2N2222A

Itt Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

FDN5618P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;

Details

2N7002

Philips Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;

Details

BAV99

North American Philips Discrete Products Div

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;

Details

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

1N4148WS

Synsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Silicon Standard

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM7805CT/NOPB

Texas Instruments

LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.

Details

NC7WZ17P6X

Fairchild Semiconductor

BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;

Details

SS14

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ESD5Z5.0T1G

Onsemi

ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.

Details

1N4148

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LL4148

Continental Device India

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SS14+

Multicomp Pro

SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.

Details

2N2222A

Diotec Semiconductor Ag

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;

Details

SMBJ18CA

General Instrument

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN2803A

Texas Instruments

ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.

Details

MAX3232CSE+ Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	3.3 V
Output Characteristics:	TOTEM-POLE
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	1.75 mm
Minimum Out Swing:	10 V
Maximum High Level Input Current:	.000001 Amp
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Maximum Supply Current:	1 mA
Terminal Finish:	Matte Tin (Sn) - annealed
No. of Terminals:	16
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	CMOS
JESD-30 Code:	R-PDSO-G16
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	70 Cel
Package Code:	SOP
Interface Standard:	EIA-232; TIA-232
Interface IC Type:	LINE TRANSCEIVER
Width:	3.9 mm
Maximum Output Low Current:	1.6 Amp
Moisture Sensitivity Level (MSL):	1
Output Polarity:	INVERTED
Input Characteristics:	SCHMITT TRIGGER
Driver No. of Bits:	2
Maximum Supply Voltage:	5.5 V
Differential Output:	NO
JESD-609 Code:	e3
Minimum Operating Temperature:	0 Cel
No. of Functions:	2
Qualification:	Not Qualified
Package Equivalence Code:	SOP16,.25
Receiver No. of Bits:	2
Length:	9.9 mm
Maximum Receive Delay:	0 ns
Additional Features:	EXTERNAL CHARGE PUMP
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	COMMERCIAL
Power Supplies (V):	3.3/5

Category Top Products

LTC2865IMSE#PBF

Analog Devices

LTC2865IMSE#PBF by Analog Devices is a CMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates b/w -40 to 85 °C, has a max supply voltage of 5.5 V, and offers differential output. Ideal for industrial applications requiring reliable data transmission over short distances.

P82B96PWRG4

Texas Instruments

The Texas Instruments P82B96PWRG4 is a Line Transceiver IC with 2 functions, operating at temperatures from -40 to 85°C. It features a max supply voltage of 15V and min of 2V, suitable for industrial applications. This small outline package has a thin profile, with dual terminals and Gull Wing form factor.

MAX232ACSE

Maxim Integrated

MAX232ACSE by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 3500ns and can handle up to 10mA supply current. Ideal for EIA-232-E, TIA-232-E, V.28, V.24 interfaces in commercial temperature grade applications.

MAX3072EESA+

Analog Devices

MAX3072EESA+ by Analog Devices is a BICMOS line transceiver with EIA-422, EIA-485, TIA-485 interface standards. It operates at 3.3V with 1.5mA supply current and offers differential output with 1500ns transmit delay. Ideal for industrial applications requiring reliable communication over long distances.

ISO1500DBQ

Texas Instruments

ISO1500DBQ by Texas Instruments is a Line Transceiver with 16 terminals, operating at -40 to 125 °C. It features EIA-485-A interface standard, differential output, and 300 ns max transmit delay. Ideal for automotive applications requiring reliable communication in harsh environments.

DS90C385AMTX/NOPB

National Semiconductor

LINE DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 56; Package Code: TSSOP; Package Shape: RECTANGULAR;

ISO1410DWR

Texas Instruments

ISO1410DWR by Texas Instruments is a line driver/receiver with 16 terminals, operating at -40 to 125 °C. It features EIA-485-A, TIA-485-A, and EIA-422 interface standards, with differential output and Schmitt trigger input characteristics. Ideal for automotive applications due to its small outline package style and nickel palladium gold terminal finish.

AM26C32IDR

Texas Instruments

AM26C32IDR by Texas Instruments is a 4-function line driver/receiver with 16 terminals. It operates b/w -40 to 85°C, with a supply voltage range of 4.5-5.5V and max output low current of 6A. Ideal for EIA-422-B/TIA-422-B interfaces in industrial applications requiring differential Schmitt trigger input characteristics.

MAX3160EEAP+T

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR;

SN75176BDRE4

Texas Instruments

SN75176BDRE4 by Texas Instruments is a Line Driver & Receiver with 8 terminals. It operates at 5V, has a max supply voltage of 5.25V, and supports EIA-422-B and EIA-485-A interfaces. Ideal for applications requiring fast transmission speeds and reliable communication in commercial temperature environments.

AM26LV32IDR

Texas Instruments

AM26LV32IDR by Texas Instruments is a 16-terminal line driver with 4 functions, operating at 3.3V. It features differential output polarity and Schmitt trigger input characteristics, suitable for EIA-422-B, TIA-422-B, V.11 interfaces in industrial applications requiring reliable signal transmission over short distances.

AM26LS31CN

NXP Semiconductors

LINE DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;

MAX3232EEUE+T

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;

DS10BR150TSD/NOPB

Texas Instruments

DS10BR150TSD/NOPB by Texas Instruments is a Line Driver with 3.6V max supply voltage, 0.6ns max transmit delay, and 3.3V power supplies. Ideal for industrial applications requiring differential output characteristics and operating temperatures from -40 to 85°C.

XISOW1432DFMR

Texas Instruments

XISOW1432DFMR by Texas Instruments is a Line Transceiver with EIA-422 and EIA-485 interface standards. It operates in automotive-grade temperatures (-40 to 125 °C) with low power consumption (0.55 mA). Featuring differential outputs, it has a max transmit delay of 125 ns, making it ideal for industrial automation and communication applications.

DS91M040TSQ/NOPB

National Semiconductor

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;

MAX3221EUE

Maxim Integrated

MAX3221EUE by Maxim Integrated is a line driver and receiver with a supply voltage range of 3V to 5.5V. It has a small outline, thin profile package style and operates in industrial temperature range. This IC is commonly used for EIA-232, TIA-232, V.24, and V.28 interface applications.

ISL83485IBZ

Intersil

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

LT1785AIS8#PBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

MAX3232EUE-T

Maxim Integrated

MAX3232EUE-T by Maxim Integrated is a Line Driver & Receiver with 3.3/5V power supplies, EIA-232/EIA-562 interface standard, and 1.6A max output low current. Ideal for industrial applications, it operates b/w -40 to 85°C with a small outline package style and dual terminal position.