Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

AD623AR-REEL7

Manufacturer

Analog Devices
Manufacturer's Part Number

AD623AR-REEL7
Description

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

LM358N

Freescale Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

FT232RL-TUBE

FTDI

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

Details

2N2222A

NXP Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;

Details

2N7002

Supertex

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;

Details

SMBJ18CA

Hy Electronic

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SDR0604-101KL

Bourns

SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.

Details

FDV304P

Onsemi

The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.

Details

NE555/D

General Electric Solid State

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;

Details

CR0805-FX-10R0ELF

Bourns

Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.

Details

MBR0520LT1

Onsemi

MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.

Details

SMBJ18CA

Changzhou Galaxy Century Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBR0520LT1G

Onsemi

MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.

Details

LM2675M-ADJ/NOPB

National Semiconductor

SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

LM358DT

ROHM

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;

Details

BAV99

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FSMLF327

Fox Electronics

FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.

Details

LM555CM

Onsemi

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

BSS138-TP

Micro Commercial Components

BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.

Details

OHN3140U

Tt Electronics Plc

OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.

Details

ISO1050DUBR

Texas Instruments

ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.

Details

AD623AR-REEL7 Technical Details

TYPE	DESCRIPTION
Package Body Material:	Plastic/Epoxy
Maximum Seated Height:	0.069 in (1.75 mm)
Nominal Bandwidth (3dB):	800 kHz
Maximum Supply Voltage Limit:	6 V
Sub-Category:	Instrumentation Amplifiers
Maximum Supply Current:	625 μA
Surface Mount:	Yes
Terminal Finish:	Tin Lead
No. of Terminals:	8
Maximum Input Offset Voltage:	350 µV
Terminal Position:	Dual
Package Style (Meter):	Small Outline
JESD-30 Code:	R-PDSO-G8
Minimum Voltage Gain:	1
Package Shape:	Rectangular
Terminal Form:	Gull Wing
Maximum Operating Temperature:	85 °C (185 °F)
Package Code:	SOP
Amplifier Type:	Instrumentation Amplifier
Nominal Slow Rate:	0.3 V/us
Width:	0.154 in (3.9 mm)
Moisture Sensitivity Level (MSL):	1
Maximum Voltage Gain:	1000
Packing Method:	Tape And Reel, 7 Inch
Nominal Negative Supply Voltage (Vsup):	-5 V
JESD-609 Code:	e0
Minimum Operating Temperature:	-40 °C (-40 °F)
Maximum Average Bias Current (IIB):	27.5 nA
No. of Functions:	1
Qualification:	No
Minimum Common Mode Reject Ratio:	70 dB
Package Equivalence Code:	SOP8,.25
Length:	0.193 in (4.9 mm)
Nominal Supply Voltage / Vsup (V):	5 V
Peak Reflow Temperature (C):	240 °C (464 °F)
Maximum Negative Supply Voltage Limit:	-6 V
Terminal Pitch:	0.05 in (1.27 mm)
Maximum Input Offset Current (IIO):	2.5 nA
Temperature Grade:	Industrial
Power Supplies (V):	5 V

Category Top Products

AD8226BRZ-RL

Analog Devices

AD8226BRZ-RL by Analog Devices is an instrumentation amplifier with 8 terminals, operating at -40 to 125 °C. It has a supply voltage of +-15V and max supply current of 0.6mA. Ideal for automotive applications due to its small outline package and matte tin terminal finish.

INA121U

Texas Instruments

INA121U by Texas Instruments is an instrumentation amplifier with a max voltage gain of 10000 and bandwidth of 0.6 MHz. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification in tight spaces. With low bias current and high common mode rejection ratio, it ensures accurate measurements in challenging environments.

INA141U

Texas Instruments

The Texas Instruments INA141U is an instrumentation amplifier with a max input offset voltage of 50uV and a max average bias current of 0.005uA. It operates at a nominal voltage of +-15V, making it suitable for industrial applications requiring precise signal amplification in tight spaces. With a bandwidth of 1MHz and high common mode rejection ratio of 117dB, INA141U is ideal for use in temperature-sensitive environments where accuracy and reliability are crucial.

PINA821IDRGR

Texas Instruments

PINA821IDRGR by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 75uV, ideal for automotive applications. It has a nominal voltage of 15V and a max operating temperature of 125°C. With a max voltage gain of 10000, this surface-mount amplifier offers precise signal amplification in compact designs.

LTC6915IDE#PBF

Linear Technology

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: HVSON; Package Shape: RECTANGULAR;

LTC2053CDD#PBF

Linear Technology

INSTRUMENTATION AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;

INA826AIDGKR

Texas Instruments

INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.

LT1167AIS8-1#PBF

Linear Technology

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

INA115AU

Burr-Brown Corporation

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

AD8253ARMZ-R7

Analog Devices

AD8253ARMZ-R7 by Analog Devices is a CMOS instrumentation amplifier with a max supply voltage of ±17V. It has a nominal bandwidth of 10MHz and can operate in industrial temperature range (-40°C to 85°C). This amplifier is commonly used in instrumentation and measurement applications.

MAX4194ESA+

Maxim Integrated

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

MCP6N16-100E/MS

Microchip Technology

MCP6N16-100E/MS by Microchip Technology is a CMOS instrumentation amplifier with a max input offset voltage of 17 uV, max average bias current of 0.0001 uA, and min common mode reject ratio of 112 dB. It is commonly used in automotive applications due to its temperature grade and small package size.

AD8237ARMZ

Analog Devices

AD8237ARMZ by Analog Devices is an instrumentation amplifier with a max input offset voltage of 75uV and max supply current of 0.15mA. It operates in automotive temperature grade range, suitable for applications requiring high precision amplification such as medical devices or sensor interfaces. The package is small outline, thin profile with shrink pitch, making it ideal for space-constrained designs.

INA122P

Burr-Brown Corporation

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

LMP8602QMME/NOPB

Texas Instruments

LMP8602QMME/NOPB by Texas Instruments is an instrumentation amplifier with 2000uV max input offset voltage, 1.5mA max supply current, and 90dB min common mode reject ratio. Ideal for automotive applications due to AEC-Q100 screening level and wide temperature range (-40 to 125 °C).

INA2126EA/250

Texas Instruments

INA2126EA/250 by Texas Instruments is an instrumentation amplifier with 500uV max input offset voltage and 0.05uA max average bias current. It operates at +-15V power supplies, has a bandwidth of 0.2MHz, and is ideal for industrial applications requiring precise signal amplification in a compact package.

AD595CDZ

Analog Devices

AD595CDZ by Analog Devices is a ceramic, metal-sealed co-fired instrumentation amplifier with a max average bias current of 0.1uA. It operates at a nominal voltage of 5V and has a bandwidth of 0.015MHz. This military-grade device is commonly used in applications requiring precise amplification and temperature measurement.

AD8420ARMZ-RL

Analog Devices

AD8420ARMZ-RL by Analog Devices is an instrumentation amplifier with a max input offset voltage of 250uV and a max average bias current of 0.027uA. It operates at a nominal voltage of 15V, making it suitable for industrial applications requiring precise signal amplification in tight spaces. With a max negative supply voltage limit of -18V and a small outline package style, this amplifier offers high performance in compact designs.

INA2126U

Texas Instruments

INA2126U by Texas Instruments is a plastic/epoxy instrumentation amplifier with a max input offset voltage of 250 uV and a max average bias current of 0.025 uA. It is commonly used in industrial applications due to its wide temperature range and high common mode reject ratio.

INA2126U

Burr-Brown Corporation

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;