Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

UDN2987LWTR-6-T

Manufacturer

Allegro MicroSystems
Manufacturer's Part Number

UDN2987LWTR-6-T
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

BAV99-7-F

Diodes Incorporated

Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.

Details

CRGCQ0805F10K

TE Connectivity

TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.

Details

1N4148

Baneasa S A

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Itt Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Itt Components

RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;

Details

LM358AN

Samsung

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

E8WSDC12-32.768KTR

Ecliptek

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;

Details

BAV99

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;

Details

SMBJ18CA

Telefunken Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Continental Device India

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

IRLML6402TRPBF

Infineon Technologies

IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.

Details

LM107H/883

Texas Instruments

LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.

Details

FDN306P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;

Details

NE555D

NXP Semiconductors

SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

MBR0520LT1

Onsemi

MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.

Details

1N4148

Philips Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

CRCW080510R0FKEA

Vishay Intertechnology

Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.

Details

ULN2803ADWRG4

Texas Instruments

ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.

Details

BAV99

Panasonic

MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

UDN2987LWTR-6-T Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.75 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	30 V
Output Characteristics:	OPEN-EMITTER
Maximum Time At Peak Reflow Temperature (s):	40
Maximum Seated Height:	2.65 mm
Maximum Output Current:	-500 A
Sub-Category:	Peripheral Drivers
Surface Mount:	YES
Maximum Supply Current:	18 mA
Terminal Finish:	MATTE TIN
No. of Terminals:	20
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	BIPOLAR
JESD-30 Code:	R-PDSO-G20
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Built-in Protections:	TRANSIENT; OVER CURRENT; THERMAL
Maximum Operating Temperature:	85 Cel
Package Code:	SOP
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	7.5 mm
Turn-off Time:	1 us
Moisture Sensitivity Level (MSL):	3
Other Names:	UDN2987LWTR6T 620-1315-6 UDN2987LWTR-6-T-ND 620-1315-2 620-1315-1
Driver No. of Bits:	8
Maximum Supply Voltage:	35 V
Turn-on Time:	.6 us
Nominal Output Peak Current Limit:	.35 A
JESD-609 Code:	e3
Minimum Operating Temperature:	-20 Cel
No. of Functions:	8
Qualification:	Not Qualified
Package Equivalence Code:	SOP20,.4
Output Current Flow Direction:	SINK
Length:	12.8 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	OTHER
Power Supplies (V):	4.75/35

Category Top Products

A2982SLWTR

Allegro MicroSystems

Allegro MicroSystems' A2982SLWTR is a small outline peripheral driver with 8 functions and built-in transient protection. It operates b/w -20 to 85°C, with a supply voltage range of 5-50V. Ideal for applications requiring a max output current of 0.35A, such as buffer or inverter-based interface ICs.

IRS2113STRPBF

Infineon Technologies

IRS2113STRPBF by Infineon Technologies is a 16-terminal peripheral driver with a supply voltage range of 10-20V. It offers built-in transient and under voltage protections, making it ideal for automotive applications. With a turn-on time of 0.16us and turn-off time of 0.15us, this CMOS technology-based IC provides source and sink output current flow direction.

BSP78

Siemens

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; No. of Functions: 1; Technology: MOS;

MIC5841YN

Microchip Technology

MIC5841YN by Microchip Technology is an 8-bit SIPO-based peripheral driver with inverted output polarity. It operates at a nominal voltage of 5V and has a max supply current of 16mA. Ideal for industrial applications, it offers built-in transient protections and sink output current flow direction.

ITS428L2

Infineon Technologies

ITS428L2 by Infineon is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -30 to 85°C with a supply voltage range of 4.75V to 43V. This small outline IC is ideal for buffer or inverter-based applications requiring a peak output current limit of 1.8A.

VNQ500PEPTR-E

STMicroelectronics

STMicroelectronics' VNQ500PEPTR-E is a 4-function peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates within a supply voltage range of 5.5V to 36V and has a compact package style suitable for various applications requiring source output current flow direction.

ULN-2804A

Sprague Electric

ULN-2804A by Sprague Electric is an 8-bit peripheral driver with open-collector output and transient protection. It operates at 50V, has 18 terminals, and a ceramic-metal-sealed co-fired package. Ideal for buffering or inverting signals in various electronic applications.

IRS2106STRPBF

Infineon Technologies

IRS2106STRPBF by Infineon is a peripheral driver with 8 terminals, operating voltage of 10-20V. It offers built-in transient and under voltage protections, ideal for automotive applications. With a turn-on time of 0.3us and turn-off time of 0.28us, it provides source and sink output current flow direction.

ISO1H815GAUMA1

Infineon Technologies

ISO1H815GAUMA1 by Infineon Technologies is a 36-terminal peripheral driver with 1.2A output current and 4.4A peak current limit. It features a half-bridge interface, sink output flow direction, and operates on power supplies of 3.3/5V to 15/30V. Ideal for applications requiring precise control in compact designs.

MIC5891YWM-TR

Microchip Technology

MIC5891YWM-TR by Microchip Tech is a Peripheral Driver with 8 bits, 12V max supply voltage, and 5V min supply voltage. It has a small outline package style and operates in industrial temperature range. Ideal for buffer or inverter-based peripheral driver applications due to its open-emitter output characteristics and built-in transient protection.

BSP75NT

Infineon Technologies

BSP75NT by Infineon Technologies is a small outline peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a nominal voltage of 12V and has a max output peak current limit of 0.7A. Ideal for applications requiring buffer or inverter based interface ICs in compact designs.

BTS6133DAUMA2

Infineon Technologies

BTS6133DAUMA2 by Infineon is a peripheral driver with 4 terminals, offering built-in protections against various faults. It operates at supply voltages ranging from 5.5V to 38V and has a nominal output peak current limit of 10A. This small outline package driver is ideal for applications requiring sink output current flow direction and fast turn-on/off times of 500 us.

ITS711L1FUMA1

Infineon Technologies

ITS711L1FUMA1 by Infineon Technologies is a peripheral driver with built-in protections for over current, over voltage, thermal, and under voltage. It operates b/w -30 to 85 °C with a supply voltage range of 5-34 V. This small outline package IC is ideal for buffer or inverter based applications requiring source and sink output current flow control.

BTS117BKSA1

Infineon Technologies

BTS117BKSA1 by Infineon Technologies is a MOS technology peripheral driver with built-in protections for transient, over current, and over voltage. It has 3 terminals, a nominal output peak current limit of 25A, and turn-on time of 70 us. This rectangular package style flange mount device is ideal for applications requiring sink output current flow direction.

ULN2003V12PWR

Texas Instruments

ULN2003V12PWR by Texas Instruments is a 7-bit peripheral driver with a nominal output peak current limit of 1A. It features built-in transient protections and operates b/w -40°C to 125°C. Ideal for applications requiring inverted output polarity and sink current flow direction in a small outline, thin profile package.

ITS42K5DLDFXUMA1

Infineon Technologies

ITS42K5DLDFXUMA1 by Infineon: Peripheral driver with 10 terminals, 42V max supply voltage, and built-in protections. Ideal for automotive applications due to -40 to 125 °C operating temp range. Features 0.4A output peak current limit and 0.5mm terminal pitch for efficient performance.

ULN2803AD

Taejin Technology

ULN2803AD by Taejin Tech is an 8-bit buffer/inverter peripheral driver with a max supply voltage of 3V and peak current limit of 0.5A. It offers built-in transient protection, operates b/w -40 to 85°C, and has a turn-on/off time of 1us. Ideal for applications requiring sink output current flow direction in surface-mount designs.

AUIPS7081RTRL

International Rectifier

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Turn-off Time: 50 us; Built-in Protections: TRANSIENT; OVER CURRENT; THERMAL;

BTS452RATMA1

Infineon Technologies

BTS452RATMA1 by Infineon Technologies is a small outline peripheral driver with 4 terminals. It has built-in protections for transient, over current, and over voltage. With a max supply voltage of 52V, it is suitable for various applications requiring source and sink output current flow direction.

L6201013TR

STMicroelectronics

L6201013TR by STMicroelectronics is a full bridge peripheral driver with 20 terminals, operating voltage range of 12-48V. It features built-in transient and thermal protections, output polarity is true with source and sink current flow direction. Ideal for applications requiring high reliability in small outline packages.