Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

APS11060LUAA-0SL

Manufacturer

Allegro MicroSystems
Manufacturer's Part Number

APS11060LUAA-0SL
Description

Magnetic Field Sensors;
Datasheet

Datasheet

Not In Stock

Popular Products

LM317T

National Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;

Details

L78L05ABZ-AP

STMicroelectronics

L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.

Details

DS18B20Z+

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;

Details

1N5819HW-7-F

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Itt Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Semitron

RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;

Details

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

BAV99

Won-top Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358DR2G

Onsemi

LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.

Details

261

Deltrol Controls

Other Relays;

Details

LL4148

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BSS84PH6327XTSA2

Infineon Technologies

BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.

Details

LL4148

Sinyork

RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

1N4148WS

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Asi Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SS14

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;

Details

DS18B20

Maxim Integrated

DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.

Details

BAV99

Hitano Enterprise

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MC7805CTG

Onsemi

MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.

Details

MBRS3200T3G

Onsemi

MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.

Details

Category Top Products

TLE4964-6M

Infineon Technologies

TLE4964-6M by Infineon is a magnetic field sensor with 3-32V supply, 1mT hysteresis, and 0-25mA current output. Ideal for applications requiring precise magnetic field detection in compact spaces due to its small size (2.9mm x 1mm x 1.3 inch) and surface mount feature.

DRV5032FCDBZR

Texas Instruments

DRV5032FCDBZR by Texas Instruments is a magnetic field sensor with hysteresis of 1.5 mT, operating temperature range from -40 to 85 °C, and output type of digital current. It is used for detecting magnetic fields in applications requiring precise measurements such as automotive sensors and industrial automation systems.

TLE4998S3XA

Infineon Technologies

TLE4998S3XA by Infineon is a magnetic field sensor with 5V max supply voltage, 0.1% linearity, and 18V output range. Ideal for applications requiring precise current output in the range of -40 to 150°C, such as automotive systems and industrial automation due to its high sensitivity and wide magnetic field range capabilities.

A1223LLHLT-T

Allegro MicroSystems

Allegro MicroSystems' A1223LLHLT-T is a magnetic field sensor with 24V max supply voltage, 30mT hysteresis, and 1mm body height. Ideal for applications requiring precise analog current output in a compact rectangular package.

SS443R

Honeywell Sensing And Control

MAGNETIC FIELD SENSOR,HALL EFFECT;

ALS31313KLEATR-2000

Allegro MicroSystems

ALS31313KLEATR-2000 by Allegro MicroSystems is a 3-axis magnetic field sensor with a supply voltage range of 2.65V to 3.5V and operating temperature from -40°C to 125°C. It features an open-drain digital voltage output interface, suitable for automotive applications due to AEC-Q100 screening level and surface mounting feature.

HAL506UA-A

TDK

HAL506UA-A by TDK is a magnetic field sensor with 24V max supply voltage, 2mT hysteresis, and 0-20mA analog current output. Ideal for applications requiring precise magnetic field detection in compact spaces due to its small body dimensions of 1.5" width, 4.05mm height, and rectangular shape with through-hole mounting feature.

AH1887-ZG-7

Diodes Incorporated

AH1887-ZG-7 by Diodes Inc. is a magnetic field sensor with 1.5 mT hysteresis, 3.3V max supply voltage, and 0.2-1.6V analog output range. Ideal for Hall effect applications, it operates b/w -40 to 85°C temperatures and has a CMOS technology with non-inverting output polarity.

TLV49645TBXALA1

Infineon Technologies

TLV49645TBXALA1 by Infineon: 26V max supply, 2.5mT hysteresis, -40 to 125°C temp range. Ideal for current output in magnetic field sensing applications with 10.4mT max field range and 25mA output.

DRV5056A2EDBZRQ1

Texas Instruments

Texas Instruments' DRV5056A2EDBZRQ1 is a Hall effect magnetic field sensor with 3-3.6V supply voltage range, -40 to 150°C operating temperature, and 39mT min magnetic field range. It outputs analog voltage from 0.20-3.10V with a max current of 1A, suitable for automotive applications meeting AEC-Q100 standards.

DRV5013ADQLPGM

Texas Instruments

DRV5013ADQLPGM by Texas Instruments is a magnetic field sensor with 38V supply voltage, 5.4mT hysteresis, and 1.52" body width. It operates in temperatures from -40°C to 125°C, outputting digital voltage via open-drain up to 30A current. Ideal for applications requiring precise magnetic field detection in compact spaces.

DRV5056A4QLPG

Texas Instruments

Texas Instruments' DRV5056A4QLPG is a magnetic field sensor with 3-3.63V supply voltage range, -40 to 125°C operating temperature, and 155mT min magnetic field range. Ideal for applications requiring analog voltage output, such as position sensing in automotive systems or industrial equipment.

US1881LUA-AAA-000-BU

Melexis N V

Melexis N V's US1881LUA-AAA-000-BU is a magnetic field sensor with 24V max supply voltage, 12.5mT hysteresis, and -40 to 150°C operating temp range. Ideal for applications requiring precise magnetic field detection in compact spaces.

DRV5013FAQDBZR

Texas Instruments

DRV5013FAQDBZR by Texas Instruments is a magnetic field sensor with hysteresis of 2.6 mT, operating voltage range from 2.5V to 38V, and output type as digital voltage. It is ideal for applications requiring precise detection of magnetic fields in a compact rectangular package suitable for surface mount installations.

HAL1002UT-A

TDK

HAL1002UT-A by TDK is a magnetic field sensor with 4.5-8.5V supply voltage range, -40 to 150°C operating temperature, and 1.2A max output current. Ideal for applications requiring precise current output in a compact rectangular package with through-hole mounting feature.

APS13290KUAA

Allegro MicroSystems

APS13290KUAA by Allegro MicroSystems is a magnetic field sensor with 24V max supply voltage, 4mT hysteresis, and 3mA max operating current. It utilizes Hall effect technology for voltage output and features a rectangular package style. Ideal for applications requiring precise magnetic field detection in compact spaces.

AH1892-Z-7

Diodes Incorporated

AH1892-Z-7 by Diodes Inc. is a magnetic field sensor with 1mT hysteresis, 3.6V max supply voltage, and 0.2-1.6V output range. Ideal for applications requiring Hall effect sensors in a compact rectangular package, such as automotive systems, industrial automation, and consumer electronics.

HAL504SF-K

Micronas Semiconductor Holding Ag

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 0-20mA;

DRV5056A4QDBZT

Texas Instruments

Texas Instruments' DRV5056A4QDBZT is a magnetic field sensor with 3-3.63V supply voltage range and -40 to 125°C operating temperature. It outputs analog voltage in the range of 0.55-3.1V, suitable for Hall effect applications like position sensing and current measurement in compact designs. With a small form factor of 2.92x1.3x1.12mm, it's ideal for surface mount installations in various electronic devices.

A1106EUA-T

Allegro MicroSystems

A1106EUA-T by Allegro MicroSystems is a magnetic field sensor with 24V max supply voltage, AEC-Q100 screening level, and 10.5mT hysteresis. Ideal for automotive applications due to its BICMOS technology, -40 to 85°C operating temp range, and voltage output type. Measuring 1.52" in width, it features a rectangular package style with through-hole mounting.