ACS710KLATR-12CB-T by Allegro MicroSystems

Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

ACS710KLATR-12CB-T

Manufacturer

Allegro MicroSystems
Manufacturer's Part Number

ACS710KLATR-12CB-T
Description

CURRENT SENSOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Maximum Operating Temperature: 125 Cel;
Datasheet

Datasheet

Not In Stock

Popular Products

2N2222A

Digitron Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BSS138BKW,115

NXP Semiconductors

NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.

Details

BAV99

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRG0805F10R

TE Connectivity

TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.

Details

CSNF651

Honeywell Sensing And Control

CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.

Details

BAV99

Shanghai Lunsure Electronic Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Dc Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317T

Fairchild Semiconductor

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;

Details

SMBJ18CA

Concord Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;

Details

2N7002

Silicon Standard

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;

Details

B340A-13-F

Diodes Incorporated

B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.

Details

LM358M

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

NUP2105LT1G

Onsemi

NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.

Details

M24308/2-1F

TE Connectivity

TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

BSS138LT1G

Onsemi

BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.

Details

BSS138NH6327XTSA2

Infineon Technologies

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.

Details

LM555CN

Texas Instruments

LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.

Details

2N7002

Central Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;

Details

LM317TG

Onsemi

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;

Details

ACS710KLATR-12CB-T Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC
Maximum Supply Voltage:	5.5 V
Output Type:	ANALOG VOLTAGE
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Body Width:	7.5 inch
Sensors or Transducers Type:	CURRENT SENSOR
No. of Terminals:	16
Package Equivalence Code:	SOP16,.4
Package Shape or Style:	RECTANGULAR
Technology:	BICMOS
Output (V):	ANALOG
Body Height:	2.34 mm
Body Length/Diameter:	10.21 mm
Maximum Operating Temperature:	125 Cel

Category Top Products

TMCS1107A3UQDRQ1

Texas Instruments

TMCS1107A3UQDRQ1 by Texas Instruments is a current sensor with 8 terminals. It has a supply voltage range of 3V to 5.5V and operates in temperatures from -40°C to 125°C. This rectangular-shaped sensor is commonly used in automotive applications due to its AEC-Q100 screening level.

ACS37002LMABTR-066U3

Allegro MicroSystems

ACS37002LMABTR-066U3 by Allegro MicroSystems is a current sensor with 16 terminals, operating voltage range of 3.15V to 3.6V, and output range of 0.3-3.0V. It is designed for automotive applications requiring AEC-Q100 screening, with a compact rectangular package suitable for surface mount installation at temperatures ranging from -40°C to 150°C.

ISL29030AIROZ-T7

Renesas Electronics

Other Sensors/Transducers; JESD-609 Code: e4; Terminal Finish: NICKEL PALLADIUM GOLD;

ACS730LLCTR-20AB-T

Allegro MicroSystems

ACS730LLCTR-20AB-T by Allegro MicroSystems is a current sensor with a supply voltage range of 4.5V to 5.5V and an output range of 0.20-4.60V. It is commonly used in automotive applications due to its AEC-Q100 screening level and surface mounting feature.

ACS714ELCTR-05B-T

Allegro MicroSystems

ACS714ELCTR-05B-T by Allegro MicroSystems is a current sensor with 8 terminals, operating voltage range of 4.5V to 5.5V, and outputting analog voltage. It has a compact rectangular shape suitable for surface mount applications in various electronic devices like power supplies and battery management systems.

AT42QT1011-MAHR

Microchip Technology

AT42QT1011-MAHR by Microchip: Cap. touch sensor, 8 terminals, 1.8-5.5V supply, digital output (0.50-2.30V). Ideal for automotive applications due to TS 16949 screening, -40 to 85°C operating temp range and compact rectangular package design.

L07P005D15

Tamura

Other Sensors/Transducers;

LM95233CISDX/NOPB

National Semiconductor

Other Sensors/Transducers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 14; Package Shape or Style: RECTANGULAR; JESD-609 Code: e3; Power Supplies (V): 3.3;

SHT41A-AD1B-R2

Sensirion Ag

Sensirion Ag's SHT41A-AD1B-R2 is a humidity and temperature sensor with 4 terminals, operating b/w -40 to 125°C. It has a digital output voltage range of 0.33-2.97V, suitable for surface mount applications in various industries. The sensor's compact square package measures 1.5mm x 1.5 inch x 0.54 mm, making it ideal for space-constrained environments.

L03S200D15

Tamura

The Tamura L03S200D15 sensor features a plastic/epoxy package, single-ended output circuit, and +-15V power supplies. It has 4 terminals with tin finish, operating from -10°C to 80°C. Ideal for various applications requiring precise sensing in temperature-sensitive environments.

DS1631S

Dallas Semiconductor

Other Sensors/Transducers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.25 mA; JESD-609 Code: e0;

BMA253

Robert Bosch

BMA253 by Robert Bosch is an accelerometer sensor with a supply voltage range of 1.62V to 3.6V and digital output voltage ranging from 0.48V to 1.92V. With a compact square body measuring 2mm in length and width, it is ideal for applications requiring precise motion detection in tight spaces at temperatures b/w -40°C to 85°C.

FMAMSDXX025WC2C3

Honeywell Sensing And Control

FMAMSDXX025WC2C3 by Honeywell is a force sensor with 6 terminals, operating b/w -40 to 85°C. It has a digital output and requires a supply voltage of 2.97-3.63V. Ideal for surface mount applications in various industries requiring precise force measurement.

AT42QT1110-AUR

Microchip Technology

AT42QT1110-AUR by Microchip is a capacitive touch sensor with 32 terminals. It operates b/w -40 to 85°C, outputting digital voltage in the range of 0.70-4.0V via open-drain configuration. This square-shaped sensor, made of plastic/epoxy, is ideal for surface mount applications due to its compact size (7x7x1mm).

TCS34001FNM

Ams Ag

COLOR SENSOR;

LA25-NP/SP34

Lem International Sa

CURRENT SENSOR;

LA205-S

Lem International Sa

LA205-S by Lem International Sa is a current sensor with 0.8% accuracy, 11.4-15.75V supply voltage range, and -10 to 85°C operating temperature. It features plastic housing and panel mount for easy installation in various applications requiring precise current output measurements.

TMCS1108A3BQDRQ1

Texas Instruments

TMCS1108A3BQDRQ1 by Texas Instruments is a current sensor with 8 terminals. It operates b/w -40°C to 125°C, providing analog voltage output. With AEC-Q100 screening level, it's ideal for automotive applications due to its surface mount feature and plastic/epoxy package material.

HO100-P-0100

Lem International Sa

CURRENT SENSOR;

ACS37002LMCATR-090B5

Allegro MicroSystems

Allegro MicroSystems' ACS37002LMCATR-090B5 is a current sensor with 16 terminals, outputting 0.5-4.5V analog voltage. It operates b/w -40 to 150°C, suitable for automotive applications due to AEC-Q100 screening and surface mounting feature.