Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

A1308KUATN-1-T

Manufacturer

Allegro MicroSystems
Manufacturer's Part Number

A1308KUATN-1-T
Description

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Resistance: 3 ohm;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148WSF-7

Diodes Incorporated

1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.

Details

1N4148

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Philips Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

MBRS360T3G

Onsemi

MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.

Details

CSNF651

Honeywell Sensing And Control

CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.

Details

1N4148WS

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20

Dallas Semiconductor

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;

Details

LM2675M-ADJ/NOPB

Texas Instruments

LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.

Details

EU2B-YS2J03F

Idec

ROTARY SWITCH;

Details

LL4148

General Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148WT

Jiangsu Changjiang Electronics Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

USB3320C-EZK-TR

Microchip Technology

Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.

Details

M39029/56-351

TE Connectivity

TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.

Details

LL4148

International Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM2675M-ADJ/NOPB

National Semiconductor

SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

2N2222A

Surge Components

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;

Details

1N4148

Terry Semiconductor

RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

FDC5614P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;

Details

A1308KUATN-1-T Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.5 V
Maximum Operating Current:	11.5 mA
Maximum Supply Voltage:	5.5 V
Output Type:	ANALOG VOLTAGE
Sensitivity (mV/G):	1.3 mV/G
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	THROUGH HOLE MOUNT
Resistance:	3 ohm
Body Width:	1.52 inch
Sensors or Transducers Type:	MAGNETIC FIELD SENSOR,HALL EFFECT
No. of Terminals:	3
Package Equivalence Code:	SIP3,.03,50
Package Shape or Style:	RECTANGULAR
Termination Type:	SOLDER
Technology:	BICMOS
Body Height:	4.12 mm
Additional Features:	IT HAS SENSITIVITY OF 1.3 MV/G
Body Length/Diameter:	4.09 mm
Maximum Operating Temperature:	125 Cel

Category Top Products

AH3376-SA-7

Diodes Incorporated

Diodes Inc. AH3376-SA-7 is a Hall Effect magnetic field sensor with 3-28V supply, 1.5mT hysteresis, and 30-55mA current output. Ideal for applications requiring precise magnetic field detection in the range of -40 to 125°C temperatures.

A1250LLHLX-T

Allegro MicroSystems

Allegro MicroSystems' A1250LLHLX-T is a magnetic field sensor with 3 terminals, operating voltage range of 3-24V, and hysteresis of 10mT. Ideal for automotive applications due to AEC-Q100 screening level and ISO-26262 compliance. Outputs current in the range of 30-60mA with non-inverting polarity.

HMC1053

Honeywell

MAGNETIC FIELD SENSOR,MAGNETORESISTIVE; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Minimum Range Of Magnetic Field: -.6 mT; Sensitivity (mV/G): 1 mV/G;

SS443A-L

Honeywell Sensing And Control

MAGNETIC FIELD SENSOR,HALL EFFECT;

OHS3150U

Tt Electronics Plc

OHS3150U by Tt Electronics Plc is a magnetic field sensor with 4.5-6V supply voltage range, 2.10-2.90V analog output, and 2.5 mV/G sensitivity. Ideal for applications requiring precise magnetic field measurements in a compact square package design with through-hole mounting feature.

HAL1002UT-A

Micronas Semiconductor Holding Ag

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: CURRENT OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: -1.2-1.2mA; Body Length/Diameter: 4.06 mm;

TLV49611MXTSA1

Infineon Technologies

TLV49611MXTSA1 by Infineon: Magnetic Field Sensor with 32V max supply, 4mT hysteresis, and 0-25mA output. Ideal for Hall Effect applications in automotive and industrial sectors due to -40 to 85°C operating range.

ACS718KMATR-20B-T

Allegro MicroSystems

Allegro MicroSystems' ACS718KMATR-20B-T is a magnetic field sensor with 16 terminals, operating voltage range of 4.5V to 5.5V, and outputting analog voltage. Ideal for applications requiring precise Hall effect sensing in temperatures ranging from -40°C to 125°C.

A1150LUA-T

Allegro MicroSystems

Allegro MicroSystems' A1150LUA-T is a magnetic field sensor with 3mT hysteresis, operating voltage range of 3-24V, and BICMOS technology. Ideal for applications requiring precise analog current output in temperature ranges from -40 to 150°C. Suitable for through-hole mounting with a rectangular package shape and matte tin finish terminals.

MLX90248ELD-EBA-000-RE

Melexis N V

MLX90248ELD-EBA-000-RE by Melexis N V is a magnetic field sensor with 1.5" body width, -40 to 85°C operating temp range, and 6 mT max magnetic field range. It features an open-drain output circuit type and is ideal for applications requiring current output sensors in a surface mount package.

DRV5056A1EDBZRQ1

Texas Instruments

DRV5056A1EDBZRQ1 by Texas Instruments is a magnetic field sensor with a supply voltage range of 3V to 3.6V and operating temperature from -40°C to 150°C. It features an analog current output ranging from -1mA to 1mA, making it ideal for automotive applications requiring precise magnetic field detection in harsh environments. With AEC-Q100 screening level, this rectangular surface mount sensor offers high accuracy and reliability for automotive systems.

A1106LLHLT-T

Allegro MicroSystems

Allegro MicroSystems' A1106LLHLT-T is a Hall effect magnetic field sensor with 3 terminals, voltage output, and hysteresis of 10.5 mT. It operates b/w -40 to 150°C, suitable for automotive applications requiring precise magnetic field detection in the range of 16-43 mT.

EW-403

Asahi Kasei Microdevices

The Asahi Kasei Microdevices EW-403 is a Hall effect magnetic field sensor with a supply voltage range of 2.5V to 5.5V and output voltage of 0.40V. It operates in temperatures from -30°C to 115°C, with a hysteresis of 10mT and max magnetic field range of ±20mT. Ideal for applications requiring precise magnetic field detection in compact spaces.

HAL2420UT-A

Micronas Semiconductor Holding Ag

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: CURRENT OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: -1.2-1.2mA; Body Length/Diameter: 4.06 mm;

DRV5011ADYBHR

Texas Instruments

DRV5011ADYBHR by Texas Instruments is a magnetic field sensor with 5.5V max supply voltage, 4mT hysteresis, and -40 to 125°C operating temperature range. Ideal for applications requiring digital current output in a square package style, such as automotive sensors and industrial control systems.

A1130LLHLT-T

Allegro MicroSystems

Allegro MicroSystems' A1130LLHLT-T is a magnetic field sensor with 3V-24V supply voltage range, -40 to 150°C operating temperature, and 2mT hysteresis. Ideal for automotive applications due to AEC-Q100 screening level, BICMOS technology, and current output interface.

A3507EUA

Sanken Electric

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 4.50-4.80V; Body Height: 5.26 mm;

SNDH-T4L-G01

Honeywell Sensing And Control

Honeywell SNDH-T4L-G01 is a Hall effect magnetic field sensor with 4.5-18V supply voltage range, -40 to 150°C operating temperature, and 20A max output current. It features a cylindrical design with wire termination and flange mounting, suitable for industrial automation and automotive applications.

SI7217-B-01-IV

Silicon Labs

MAGNETIC FIELD SENSOR,HALL EFFECT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;

TLE4923HALA1

Infineon Technologies

TLE4923HALA1 by Infineon Tech. is a magnetic field sensor with 18V max supply voltage, 1.5mT hysteresis, and 8.5mV/G sensitivity. It features a digital output interface, suitable for applications requiring precise magnetic field detection in compact spaces like automotive sensors or industrial automation systems.